User manual LOWRANCE GLOBALNAV 212

[. . . ] GlobalNav 212 INSTALLATION AND OPERATION INSTRUCTIONS TM Copyright © 1996, 1997 Lowrance Electronics, Inc. GlobalNav 212TM is a trademark of Lowrance Electronics Lowrance® is a registered trademark of Lowrance Electronics WARNING!USE THIS UNIT ONLY AS AN AID TO NAVIGATION. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. [. . . ] Now move the cursor to the location that you want to navigate to. A new, highlighted menu appears on the list: "Go To Cursor". It now shows navigation data to the cursor location (shown as "D" on the plotter). See the screens below. Navigating to a Waypoint using the Plotter The unique "birds-eye" view used by the plotter gives you an easy way to navigate to a waypoint. On the plotter screen shown above, the diamond with a cross in it is your present position. The box with the "S" in it was your starting location when you recalled the waypoint. The dotted line is called a track line and is the shortest path from the starting location to the destination. The number "1" is waypoint number one, which is the recalled waypoint and the destination. The "D" on the plotter screen at the top of this page is the cursor destination, when the cursor position is used as a destination. If you follow the track line, you'll reach the destination, covering the shortest distance in the least time. This product does NOT take land features, restricted or prohibited areas, or any other feature into account when it projects the track line on the screen. Use caution when navigating to a location. Make certain there are no obstructions in your path. OTHER WAYPOINT OPTIONS Move a Waypoint You can move all information from one waypoint number to another to help organize the waypoints. In this example, we'll move all of the information in waypoint number 1 to waypoint number 9. To do this, highlight the waypoint options label on the waypoint screen and press the right 29 arrow key. Now highlight the "Move WPT" label. The "From" label is highlighted at the top of the screen. Press the right arrow key until the waypoint number that you want to move appears. In this example, we selected waypoint number 1. Now press the down arrow key once to highlight the "To" label. Press the left or right arrow key until the number that you want to move the waypoint to appears. [. . . ] Always use the original shipping container and filler material the product was packed in when shipping your product. 2 Always insure the parcel against damage or loss during shipment. Lowrance does not assume responsibility for goods lost or damaged in transit. For proper testing, repair, and service, send a brief note with the product describing the problem. [. . . ]