User manual LOWRANCE IFINDER EXPLORER

[. . . ] 988-0148-831 www. lowrance. com iFINDER Explorer Handheld Mapping GPS Receiver Operation Instructions Copyright © 2006 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. IFINDER Explorer is a trademark of Lowrance Electronics, Inc. [. . . ] For this example, let's look by name. If your waypoint list is a long one, you can search for a waypoint by spelling its name in the FIND BY NAME box. Press or to change the first character, then press to move the cursor to the next character and repeat until the name is correct, then press ENT to jump to the list below. If you don't want to spell out the name, you can jump directly to the FIND IN LIST box by pressing ENT. Use or to select the waypoint name, press ENT and the waypoint information screen appears with the GO TO command selected. To begin navigating to the waypoint, press ENT. Press MENU|MENU| to MY TRAILS|ENT and the following screen appears. Trails Menu, Advanced Mode. 54 2. Press to saved trail list, then use or to select a trail to navigate. With the trail name highlighted, press ENT| to NAVIGATE|ENT. Wait while the iFINDER creates a route from the trail. When the progress message disappears, the unit displays a trail information screen, with NAVIGATE ROUTE highlighted in the top command box. Tip: Back Track a Trail Running the Navigate command will lead you along the trail from its starting point to its ending point. You can also back track a trail, following it in reverse. In Easy Mode, this is done automatically with the most recently created active trail. In Advanced Mode, you must select the Reverse command to reverse the trail point order before you start navigating. From the Edit Route menu, press to REVERSE ROUTE|ENT| to NAVIGATE ROUTE. The unit begins showing navigation data along the trail. Follow the steering arrow on the Map Page or the compass bearing arrow on the Navigation Page. NOTE: If you are at or near the start of the trail, the arrival alarm will go off as soon as navigation begins because of your proximity to the trail's first point. Upon arrival at your destination, cancel navigation. Press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES |ENT. Routes A route is a series of waypoints linked together in an ordered sequence, used to mark a course of travel. You can visualize a route as a string of beads. The beads represent waypoints and the string represents the course of travel connecting waypoint to waypoint. [. . . ] We reserve the right to do so without notice. . . . in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 905-629-1614 (not toll-free) 8 a. m. [. . . ]