User manual LOWRANCE IFINDER H2O

[. . . ] 988-0148-461 www. lowrance. com iFINDER H2O Handheld Mapping GPS Receiver Operation Instructions Copyright © 2004 Lowrance Electronics, Inc. iFINDER H2O is a trademark of Lowrance Electronics, Inc. Lowrance® is a registered trademark of Lowrance Electronics, Inc. Navionics is a registered trademark of Navionics, Inc. [. . . ] If the zoom range says "4 mi, " the map shows an area 4 miles wide from the left edge of the screen to the right edge of the screen. Press the ZIN key (zoom in) to move in closer and see greater detail in a smaller geographic area. Press the ZOUT key (zoom out) to move farther away and see less map detail, but a larger geographic area. You can pan or scroll the map northward, southward, eastward or westward by using the arrow keys, which launches the cross-hair map cursor. To clear the cursor, press EXIT, which jumps the map back to the current position or the last known position. Find Distance From Current Position To Another Location 1. While on the Map page press: MENU| to FIND DISTANCE|ENT. Center your cursor over the position you want to find the distance to. A rubber band line appears, connecting your current position to the cursor's location. The distance along that line will appear in the lower left-hand corner of the screen. Press EXIT to return to regular operation. The distance to Dallas from the starting point is 211. 1 miles. Find Distance From Point to Point You can also measure distance between two other points on the map. While on the Map page press: MENU| to FIND DISTANCE|ENT. Center your cursor over the first position. (A rubber band line appears, connecting your current position to the cursor's location. ) Press ENT to set the first point, and the rubber band line disappears. The rubber band line reappears, connecting the first point you set to the cursor. The distance along that line will appear in the lower left-hand corner of the screen. Press EXIT to clear the command and return to the page screen. Find Your Current Position Finding your current position is as simple as turning iFINDER on. Under clear sky conditions, the unit automatically searches for satellites and calculates its position in approximately one minute or less. NOTE: "Clear sky" means open sky, unobstructed by terrain, dense foliage or structures. Clouds do not restrict GPS signal reception. If for some reason satellite acquisition takes longer, you may be inside a structure or vehicle or in terrain that is blocking signal reception. To correct this, be sure you are positioned so that the unit has as clear a view of the sky as possible, then turn the unit off and back on again. If you have the cursor activated, any information the unit gives you will be based on the cursor position, not your own. [. . . ] We reserve the right to do so without notice. . . . in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 905-629-1614 (not toll-free) 8 a. m. [. . . ]