User manual LOWRANCE LDT-3003

[. . . ] LDT-3003 Installation and Operation Instructions The LDT-3003 combines a clock, hour meter, voltmeter, and up to three temperature sensors in one housing. (Since the LDT-3003 is packed with different options, you may not have all three temp sensors. ) It shows the temperature in either °F or °C, selectable by the user. This unit fits in a standard 2 1/8" (54 mm) hole used by most marine equipment manufacurers. Mounting The LDT-3003 mounts in any dash or flat panel that's at least 2 1/2" (64 mm) in diameter. [. . . ] The word "OFF" appears on the display. Press the SET key to exit the set clock alarm. Set Temperature Alarm To set the temperature alarm, press the SET key until the alarm screen similar to the one at right appears. The word "WATER" begin flashing at the bottom of the screen. The letters "ALM" at the top of the screen begins flashing along with "WATER". Press the MODE key to select the first number in the temperature. Press the "SET" key to change it. When this number is correct, press the MODE key again. Press the SET key until this number is correct. Continue this sequence until the temperature alarm is set. When it is correct, press the SET key to switch to the next temperature alarm (T2 and T3). 6 You can turn the temperature alarm off by pressing the SET key until the temperature alarm appears, then press the MODE key once, then press the SET key again. The word "OFF" appears on the display. Press the SET key to exit the set clock alarm. Set Fahrenheit or Celsius To change the temperature displays from Fahrenheit to Celsius, press the SET key until the °F and the letter "F" flashes on the screen. Now press the MODE key to switch it to °C. The clock should now be showing on your screen. If it isn't, or if you get lost in any of these menus, simply turn the unit off and back on again. Then begin pressing the SET key until you reach the alarm or time that you wish to change. 7 Lowrance's UPS Return Service - U. S. A. Only Lowrance Electronics and United Parcel Service (UPS) are proud to offer all of our customers free shipping for all units sent to us for repair or service. If you have to send this unit to the factory, and you are in the continental United States, use the enclosed UPS shipping label for easy, free shipping to our factory customer service department. Call Lowrance at the toll-free number on the front of this flyer for a Return Authorization (RA) number and instructions about what accessories to return. Do not return a product to the factory without a Return Authorization (RA) Number! [. . . ] For proper testing, repair, and service, send a brief note with the product describing the problem. Be sure to include your name, return shipping address, and a daytime telephone number. Accessory Ordering Information - All Countries To order accessories such as power cables or transducers, please contact: 1. Most quality dealers that handle marine electronic equipment should be able to assist you with these items. Consult your local telephone directory for listings. [. . . ]