User manual LOWRANCE LMF-400

[. . . ] 988-0151-222 www. lowrance. com Installation and Operation Instructions Multi-function Gauge LMF-400 Copyright © 2006 Lowrance Electronics, Inc. All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Lowrance Electronics may find it necessary to change or end our policies, regulations and special offers at any time. We reserve the right to do so without notice. [. . . ] The digital data boxes can display: Alternator Voltage, 32 Battery Voltage, Engine Temperature, Engine Water Pressure, Engine Oil Pressure, Fuel Pressure, Engine Boost Pressure, Transmission Oil Pressure, Atmospheric Pressure, Temperature, Depth, Engine Load, Total Engine Hours, Fuel Flow, Fuel Economy, Fuel Remaining, Fuel Used, Fuel Range, Trip Fuel Use, Seasonal Fuel, Water Speed (Paddle Wheel Speed), Ground Speed (GPS) and Tachometer. Make sure the Dual Digital page has been added to the page screen rotation. Use the ENTER and EXIT keys to scroll the Dual Digital page onto the main display. Press MENU, select CUSTOMIZE and press ENTER. A menu will appear with two options: Top Data and Bottom Data. Highlight the desired option and press ENTER. Select the data you want to display and press ENTER. One of two things will happen, depending on the data category you selected. If you chose Atmospheric Pressure, Temperature, Depth, Water Speed or Ground Speed, you will be taken back to the Top DataBottom Data menu. Repeat Steps 4-5 for the other data box. If you selected Alternator Voltage, Battery Voltage, Engine Temp, Engine Water Pressure, Engine Oil Pressure, Fuel Pressure, Engine Boost Pressure, Transmission Oil Pressure, Engine Load, Total Engine Hours, Fuel Flow, Fuel Economy, Fuel Remaining, Fuel Used, Fuel Range, Trip Fuel Used, Seasonal Fuel or Tachometer, you will be taken to the Select Engine menu where there will be up to three options: Port, Center and Starboard. The data category you selected will retrieve data from the engine you choose. Select the desired engine and press ENTER. You will be taken back to the Top Data-Bottom Data menu. Highlight the other data box and repeat steps 4-5. When both digital data boxes are customized, press EXIT|EXIT to return to the main display, where the dual digital page will be shown with the data you chose. 33 Dual Digital page (left) with Quad Digital page (right). Quad Digital The Quad Digital page has four digital data boxes, stacked one on top of the other. The digital data boxes can display: Alternator Voltage, Battery Voltage, Engine Temperature, Engine Water Pressure, Engine Oil Pressure, Fuel Pressure, Engine Boost Pressure, Transmission Oil Pressure, Atmospheric Pressure, Temperature, Depth, Engine Load, Total Engine Hours, Fuel Flow, Fuel Economy, Fuel Remaining, Fuel Used, Fuel Range, Trip Fuel Use, Seasonal Fuel, Water Speed (Paddle Wheel Speed), Ground Speed (GPS) and Tachometer. Make sure the Quad Digital page has been added to the page display. Use the ENTER and EXIT keys to scroll the Quad Digital page onto the main display. Press MENU, select CUSTOMIZE and press ENTER. The Data Box menu will appear with four options: Data Box 1, Data Box 2, Data Box 3 and Data Box 4. Highlight the desired data box and press ENTER. [. . . ] We reserve the right to do so without notice. . . . in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. [. . . ]