User manual LOWRANCE LMS-520C

[. . . ] 988-0151-461 LMS-520C & LMS-525C DF Fish-finding Sonar & Mapping GPS Installation and Operation Instructions Copyright © 2006 Lowrance Electronics, Inc. All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. Lowrance® is a registered trademark of Lowrance Electronics, Inc. [. . . ] Highlight the desired data category and press ENT, which will expand the list, revealing several subcategories with checkboxes next to them. Select the desired subcategory and press ENT, which will place a checkmark in the checkbox, showing the selected data is set for display. If you want to display other data types, repeat Steps 4 and 5. Press EXIT repeatedly to get back to the Custom Gauges page. The data you selected will now be displayed on the screen. To change Overlay data size: 1. From the Custom Gauges page, press MENU SELECT OVERLAY DATA and press ENT. The Overlay Data Shown menu will appear. Highlight the Data Type you want to resize, then use to set the data to the desired size to one of four options: Off, Small, Medium, Large and Enormous. To change the size of another Data Type, repeat the steps above. To return to the Sonar with Custom Gauges display, press EXIT. NOTE: One of the data display options for the Satellite Status page is "Position Error" (horizontal position error), which can appear in one of the page's data boxes. If you turn on Position Error, it will show you the expected error from a benchmark location. In other words, if the Position Error box shows 50 feet, then the position shown by the unit is estimated to be within 50 feet of the actual location. This also gives you an indicator of the fix quality the unit currently has. The smaller the position error number, the better (and more accurate) the fix is. If the position error flashes dashes, then the unit hasn't locked onto the satellites, and the number shown isn't valid. (For details, see the Customize Page Displays entry in Sec. 8. ) The Satellite Status Page has its own menu, which is used for setting various options. (Options and setup are discussed in Sec. To access the Satellite Status Page Menu, from the Status Page, press MENU. Navigation Page This screen has a compass rose that not only shows your direction of travel, but also the direction to a recalled waypoint. The page has two options, navigation with digital data and navigation with sonar. [. . . ] Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. Eastern Standard Time, M-F . . . outside Canada and the USA: If you have technical, return or repair questions, contact the dealer in the country where you purchased your unit. [. . . ]