User manual LOWRANCE RADAR AND RIM 100 OPERATION

[. . . ] 988-0161-011 www. lowrance. com Radar Operation Instruction Manual Copyright © 2006 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Lowrance is a registered trademark of Lowrance Electronics, Inc. NMEA 2000 is a registered trademark of the National Marine Electronics Association. Lowrance Electronics may find it necessary to change or end our policies, regulations and special offers at any time. [. . . ] Use to adjust the Anti-Rain Clutter setting to a desired level. Press EXIT to remove the scrollbar from the screen. 20 Anti-Rain Clutter vertical scrollbar (left) with Interference Rejection scrollbar (right). Interference Rejection This feature filters out signals from other radars close to your location. To adjust Interference Rejection: 1. Select INTERFERENCE REJECTION from the radar menu and press ENT. That will launch the Interference Rejection vertical scrollbar. Use to adjust the Interference Rejection setting to a desired level. Press EXIT to remove the scrollbar from the screen. Radar Range This feature allows you to expand the area shown on the display unit, which is helpful when you want to see targets a great distance from you. You also can decrease the range to focus on targets closing in on you. NOTE: When switching radar ranges, you likely will need to adjust Gain, STC and FTC settings to achieve optimum performance. To adjust radar range: 1. Select RADAR RANGE from the radar menu and press ENT, which will launch the radar range list. Use to select the desired range and press ENT. The range you chose is now in use on the radar display. Tip: Once you are comfortable with the various radar range options, you can more easily switch ranges by pressing the ZIN or ZOUT keys. Radar Echo Expansion This feature will make weak signals more visible on the display by lengthening radar echoes. To turn on or turn off Radar Echo Expansion: Highlight RADAR ECHO EXPANSION on the radar menu, then press ENT to turn it on (check) or turn it off (uncheck). Radar Echo Expansion is good for seeing weak echo returns -- like birds -- at a distance. Remember, when Echo Expansion is on, all signals on the display will be enlarged, including clutter. Echo Trail Interval This option allows you to compile a history (trail) of the movements of all radar targets via preset intervals. To adjust Echo Trail Interval 1. Select ECHO TRAIL INTERVAL from the radar menu and press ENT, which will launch the Echo Trail Interval menu. The Echo Trail Interval menu will display a series of intervals with options ranging from Continuous to Off. Use to highlight the desired interval and press ENT. Press EXIT to get back to clear the menu. NOTE: This feature is best used in open water or when your vessel is stationary and you are tracking a moving target. [. . . ] We reserve the right to do so without notice. . . . in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. [. . . ]