User manual M-AUDIO AXIOM 49

[. . . ] Axiom User Guide English Table of Contents English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the Data 2 button and enter the OFF value (this should be 0 in most cases). < < 25-note version: < < < < < < < < Select the pad as described in section 2. The LCD display will flash the currently assigned controller for the pad. Enter 146 to set the pad to send an ON value when pressed, and OFF value when released. Press the Data 1 button and enter the controller number from Appendix C that you want the pad to send. The Data 2 and Data 3 keys can be used in the same fashion to specify the ON value (this should be 127 in most cases) and the OFF value (this should be 0 in most cases). < < < 22 English Axiom Line User Guide 3. 5. 4 Pressure Control Using the pressure control, the pads give you a different type of performance option on your Axiom. You can control parameters on your software in a way that would not be possible on a standard dial or slider. The pressure pads can be used to make some very interesting effects. As we've seen above, each pad can be assigned an individual MIDI controller number. It is also possible to assign minimum and maximum values to the controller. As you apply more and more pressure to the pad, the value of the controller you are sending will increase, until the maximum value you specified is reached. On release, the pad will return to the minimum value you specified. To set the controller for a pressure pad with a minimum and maximum value: 49- and 61-note versions: < < < < < < Select the pad as described in section 2. The LCD display will show the currently assigned controller for the pad. Enter the controller number from Appendix C that you want the pad to send. If you want to specify a minimum value limit, press the Data 2 button and enter the minimum value. If you want to specify a maximum value limit, press the Data 3 button and enter the maximum value. 25-note version: < < < < < Select the pad as described in section 2. The LCD display will show the currently assigned controller for the pad Enter the controller number from Appendix C that you want the pad to send, using the numeric data entry keys. If you want to specify a minimum value limit, press the Advanced button, followed by the Data 2 key and enter the minimum value. If you want to specify a maximum value limit, press the Advanced button, followed by the Data 3 key and enter the maximum value. Press the Enter key to confirm. < < 3. 5. 5 Pad Curve The Pad Curve setting is used to set the response curve of all eight pads. It is not possible to set the response curve of the pads independently. There are nine velocity response curves and three fixed curves. To change the velocity curve for the pads: 49- and 61-note versions: < < Press the Bank LSB and Bank MSB buttons together to access the Pad Curve setting. The LCD will show the currently selected pad curve. [. . . ] To make the most of the Wizoo preset, the host should be set to transmit on all MIDI channels to Darbuka or Latigo. 48 English Axiom Line User Guide Presets 7 to 12: Propellerhead Reason Each Reason module is specifically covered by these presets, except for Redrum. Redrum is always triggered by the trigger pads no matter which Reason preset is selected. To set up your Axiom keyboard to control the desired Reason module: < < < < < Select the Edit menu (Windows) or Reason menu (Mac), followed by "Preferences. " Select Advanced MIDI from the Page drop-down menu. Select your Axiom keyboard as the Bus A device. [. . . ]