User manual M-AUDIO IE-10 AUTRE NOTICE

[. . . ] Once your IE earphones are inserted, gradually increase the volume to a moderate listening level. Using earphones at high volumes (greater than 85dB) or for extended periods of time (more than one hour per day) can permanently damage your hearing. Ringing in your ears or other discomfort can indicate that the music volume is too high. Hearing damage can be gradual and cumulative. In many cases there are no obvious warning signs. [. . . ] In addition, our optional 1/4-inch adapter (included with the IE-20 XB and the IE-30 earphones) will allow you to connect to a variety of other consumer electronics equipment. M-Audio has included a variety of ear tips to ensure a good seal for your ears. All ears are unique so you will need to determine which tips are most comfortable for you. Most users find that the single-flange silicone ear tips provide a good fit for their ears and are the easiest to use. However, some customers prefer the foam tips for the best seal and more secure fit (see section on Suggestions for Using Ear Tips). Your M-Audio earphones come with medium single-flange silicone ear tips already attached. Included with your earphones are the following additional ear tips: 1 Single-flange silicone ear tips (2 small and 2 large) Double-flange silicone ear tips Disposable foam ear tips 2 3 8 8 | IE Professional Reference Earphones | User Guide EARPHONE INSERTION "ROCK `N' ROLL" It is important to get a good ear fit to maximize comfort and optimize the listening experience. A correct seal will help eliminate background noise and offer the best frequency response when listening to music. Go to www. m-audio. com/earphones to view the Earphone Insertion Demonstration. Be sure that the volume is turned down to a minimum on the device that you will be using. Next, plug your earphones into the output. Step 1 Identify the left earphone (marked with an "L") and the right earphone (marked with an "R"). Holding each earphone with the cord pointing straight up, gently glide the ear tip into the ear canal. Step 2 Keeping your earphones in the same position, rock your hands slightly forward to slide the ear tip comfortably into the ear canal. Step 2 Step 1 IE Professional Reference Earphones | User Guide | 9 Step 3 Now, gently roll your earphones back to create the seal desired. (Note: if you are having difficulty please see the section on Suggestions for Using Ear Tips). Step 4 Wrap the ear loops around the top of the ear to secure the earphones. The cables will hang behind the ears and either down your back, or in front of your chest. Use the adjustment slider located near the Y-junction to change the length of the cables. Now you are ready to gradually increase the volume on your listening device and begin your M-Audio professional reference earphone experience. Proper Reference Earphone Removal ­ Reverse "Rock `N' Roll" To remove, grasp the earphone and gradually rock forward to break the seal. Once the seal is broken, gently slide the earphone out of the canal. Be sure to clean the earphones before your next use and store them in your storage case. [. . . ] Technical Support Floor 6, Gresham House, 53 Clarenden Road, Watford, WD17 1LA, United Kingdom Sales tel: . support@maudio. co. uk tel:(Mac support): . www. maudio. co. uk M-Audio France Floor 6, Gresham House, 53 Clarenden Road, Watford, WD17 1LA, United Kingdom Assistance Technique e-mail : . www. m-audio. fr Renseignements Commerciaux tel : . [. . . ]