User manual M-AUDIO MINIMONSTA QUICK START GUIDE

[. . . ] . 5 TUTORIAL 6: HOW DO I TAKE A PATCH AND USE IT FOR THE BASIS OF A META-PATCH?. 28 TUTORIAL 9: MIDI CONTROL LED'S . . 30 Macintosh Logic 7 and Ableton Live. . 12 THE LOUDNESS CONTOUR MODIFIERS PANEL . [. . . ] LFO Amp Slider This determines the overall amplitude of the LFO. 0% means that the LFO does not affect the sound. LFO Time Slider Determines the time of the LFO waveform, ranging between 1/64th of a beat and 256 beats, or 0. 0078 to 128. 00 milliseconds, depending on the status of the MS/BEATS button. LFO Delay Slider Sets a delay before the LFO setting becomes effective. The delay time ranges between 0 and 256 Beats or 0 to 128. 00 milliseconds, depending on the status of the MS/BEATS button. LFO Sample & Hold Slider Adds a random element to an LFO waveform by Sampling and Holding specific points of it. The higher the slider value, the longer the Sample & Hold period, the lower the slider value, the quicker the Sample & Hold period. LFO Smooth Slider This allows you to smooth out fast transitions of an LFO signal and is applied after the Sample & Hold. The smoothing factor is scaled to the main LFO Time and therefore the final shape doesn't change when the Time is changed. 0% disables the smoothing and leaves the waveform untouched. LFO Sync Slider This allows the LFO phase to be reset at every Note On. The phase value will be the indicated percentage. You can turn the Sync off and allow the LFO to run free by moving the slider all the way to its top position, marked Off. Copy and Paste Buttons Use the COPY button to copy ALL current modulation settings (both LFO and XADSR) into the internal clipboard. Use PASTE to apply them to another parameter. This is very useful to quickly duplicate modulation settings across a large amount of parameters. For example, if you've set up complex LFO & XADSR settings on the Filter Cutoff Knob and you want to transfer these settings to the Emphasis Knob, simply click on the Filter Cutoff Knob followed by the COPY button then click on the Emphasis Knob followed by the PASTE button. The settings from the former will be duplicated to the latter. XADSR Envelope These knobs and sliders allow independent shaping of any parameter that can be controlled by this section. XADSR Amplitude Knob With positive and negative values, this knob determines the amplitude of the XADSR Envelope. XADSR Velocity Knob Again with both positive and negative values, this knob determines how velocity affects the XADSR Envelope. XADSR Attack Slider Definable between 0 and 256 beats (or 0 to 128. 00 milliseconds, depending on the status of the MS/BEATS button) this governs the Attack Time of the XADSR Envelope. Attack begins once a Note On event is received. XADSR Decay Slider Definable between 0 and 256 beats (or 0 to 128. 00 milliseconds, depending on the status of the MS/BEATS button) this governs the Decay Time of the XADSR Envelope, after which the envelope moves to the sustain point. [. . . ] +49 (0)7941 9870030 Technical Support (email): . support@m-audio. de Technical Support (fax): . +49 (0)7941 98 70070 Internet Home Page: . Floor 6, Gresham House, 53 Clarendon Road, Watford, WD17 1LA, United Kingdom Sales Information (phone): . [. . . ]