User manual M-AUDIO MK-125

[. . . ] WARNING: Do not mix old and new batteries Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries 5-1 5-2 Press WHEEL ASSIGN switch, LED starts to flash showing the number of the current MIDI function. Press numeric keys 0-9 to select a MIDI function. Also you can use +/switches to increase or decrease the value of number. Note: * If there is no key action for 5 seconds, the LED will return to show the current PROGRAM CHANGE number. [. . . ] Press one (or two) of the numeric keys to change the channel. LED changes to the pressed number. Press PROGRAM switch, LED starts to flash showing the current PROGRAM CHANGE number. Press the numeric keys to set the PROGRAM CHANGE number to be sent. If you enter 3 digits program number, the number will be sent immediately. If you enter 1 or 2 digit(s) program number, the number will be sent after the LED returns to normal. You can also use the "+" or "-" switch to change the value. Load Load Note: * If there is no key action for 5 seconds, the LED will stop flashing and show the current PROGRAM CHANGE number. * If the number you press is larger than 127, it will return to the previous PROGRAM CHANGE number. * When the display is showing the current PROGRAM number, you can also use the +/- switch to change the program number without pressing the `PROGRAM' switch. Soft Soft Hard Soft Soft Hard Note: If there is no key action after the LED starts to flash, the LED will return to show the current PROGRAM CHANGE number. 12. Sending Bank MSB (Most Significant Bit) and LSB (Least Significant Bit) message Allows you to send any value of MSB or LSB each from 0-127. 9-1 Press CHANNEL and PROGRAM switches simultaneously. The LED starts to flash showing the current value of LSB. Press the numeric keys to change the LSB value. If you enter 3 digits program number, the number will be sent immediately. If you enter 1 or 2 digit(s) program number, the number will be sent after the LED returns to normal. You can also use the "+" or "-" switch to change the value. Bank Select LSB, Bank Select MSB and Program Number are sent together. Press PROGRAM and MEMORY switches simultaneously. The LED starts to flash showing the current value of MSB. Press the numeric keys to change the MSB value. If you enter 3 digits program number, the number will be sent immediately. If you enter 1 or 2 digit(s) program number, the number will be sent after the LED returns to normal. You can also use the "+" or "-" switch to change the value. [. . . ] 10-1 Select the design PROGRAM CHANGE, BANK LSB and MSB. 10-2 Press MEMORY switch, the LED will start to flash. 10-3 Press the numeric key (from 0-5) you wish to assign the setting to. Now, the current PROGRAM Number and BANK CHANGE setting is memorized on the selected numeric key. APPENDIX MIDI IMPLEMENTATION CHART Function : Default : Changed : Default : Messages : Altered : True Voice : Note ON : Note OFF : Key's Transmitted 1-16 1-16 -----------------------X ********************* 0-127 ********************* O X X O O O 0-127 ********************* X X X X X X X X O X Volume can be controlled by assigning the Modulation Wheel. Basic Channel Mode Note Number Velocity 11. [. . . ]