Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual M-AUDIO MK-261. We hope that this M-AUDIO MK-261 user guide will be useful to you.
Lastmanuals help download the user guide M-AUDIO MK-261.
Detailed instructions for use are in the User's Guide.
[. . . ] Volume Control
return to show the present PROGRAM
Moving the CHANNEL VOLUME slider transmits MIDI CHANNEL VOLUME messages to connected equipment. This allows you to control the volume level of the selected channel for connected devices, e. g. PITCH BEND WHEEL
Moving the PITCH BEND WHEEL transmits MIDI PITCH BEND messages to any connected equipment. This allows you to bend the pitch of a sound up (or down) to add expression to your performance. [. . . ] Note: Turning the power off always resets the shifted pitch to the default value. OCTAVE CHANGE
This function allows you to shift the pitch up to three octaves higher or two lower. 8-1 Press the OCTAVE UP or DOWN to change the octave range. The LED shows the new OCTAVE value.
* Press OCTAVE UP and DOWN switches simultaneously to reset the pitch to the default value. Note: if the UP or DOWN switch is not pressed for 5 seconds, the LED will return to show the PROGRAM CHANGE number. Sending a PROGRAM CHANGE number
Using the PROGRAM switch and the numeric keys, you can send any MIDI PROGRAM CHANGE from 0-127. The LED starts to flash showing the 9-2 Press the numeric keys to alter the PROGRAM CHANGE number. You can also use the "+" or "-" keys to
Note: * if you don't do anything for 5 seconds the LED stops flashing and shows the current PROGRAM CHANGE number. * if the number you press is larger than 127, it will return to the previous PROGRAM CHANGE number. Sending BANK MSB and LSB message
You can send any value of MSB or LSB from 0-127. 10-1 Press the CHANNEL and PROGRAM switches simultaneously. The LED starts to flash showing the current value of the LSB. Press the numeric keys to change the LSB value. You can also use the "+" or "-" switches to change the value. 10-2 Press the PROGRAM and MEMORY switches simultaneously. The LED starts to flash showing the current value of the MSB. Press numeric keys to change the MSB value. You can also use the "+" or "-" switches to change the value. Note: * if you don't do anything for 5 seconds the LED stops flashing and shows the current PROGRAM CHANGE number. * if the number you input is over 127, it will return to the previous LSB or MSB value.
11.
PROGRAM & BANK CHANGE MEMORY
You can assign a selected PROGRAM CHANGE as well as a BANK LSB and a BANK MSB to one of ten numeric keys (09). [. . . ] 13-1 Press MEMORY and X'POSER switches simultaneously. Hold the keys down for at about 2 seconds, then the reset message is sent.
14. GENERAL MIDI MODE RESET This function allows you to send a GENERAL MIDI MODE RESET message. Hold the key down for at about 2 seconds, then the reset message is sent. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE M-AUDIO MK-261
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual M-AUDIO MK-261 will begin.
