User manual M-AUDIO MM-401

[. . . ] Can be reset via a computer hardware reset. Accepts MIDI Time Code data in intelligent mode. Built-in internal timer in UART mode. Drivers Some MIDI applications make use of drivers. You will have to make sure that the correct MIDI driver is installed in your application for the MM-401 to work with it. [. . . ] The *Control Panel* can be found under the *Main* group. In addition to installing the Windows MIDI driver, you will also have to set up your Windows MIDI applications so they select the installed MPU-401 (many times your software will use a setting called Multimedia Extensions as its Driver setting to access the MPU401 driver) for MIDI input and output. First-Time Windows Driver Install If there is no current MM-401 Windows MIDI driver installed on your system, follow these steps to install MM-401 Windows driver: 1. Click open the *Control Panel. * Click on the *Drivers* icon. If one exists, then the driver has already been installed -- click on cancel, and close the *Control Panel*. You then can go directly to the last step to set up your application. If the MPU-401 driver is not present, please continue. Select the "Unlisted or Updated Driver" entry and push the "OK" button. 6. 13. You will be prompted for a disk drive from which to read the Windows 3. 1 drivers. Insert the proper Windows disk into your floppy disk drive, and, if necessary, enter the disk drive specification in the prompt box. When the "Add Unlisted or Updated Driver" Window pops up, select the "Roland MPU-401" and click on OK. The Roland MPU-401 driver setup dialog box will then appear. It will allow you to set up the driver to match the interrupt/IRQ and address settings on your MM-401 card. Some systems use MPU-401 address/port settings other than those available in the dialog box. You must then change this manually by editing the "SYSTEM. INI" file in your Windows root directory, and changing the address/ port listed under the [MPU401, DRV] for your hardware. An incorrect setting may result in your computer crashing or locking up. If there is any question about how to make these changes, please consult your computer's user's guide or manufacturer directly. Once you've selected the interrupt/IRQ and address/port, click on OK. In order for Windows to install the new driver completely, you will be required to exit and restart Windows. After restarting Windows, run your MIDI application(s). You will need to set up each MIDI application in order to use the MM-401 as the selected interface. From within the application(s), select the MPU-401 as the current device. [. . . ] Do you have any information or drivers for the card?MIDIMAN will not be liable for consequential, special, indirect, or similar damages or claims including loss of profit or any other commercial damage, even if its agents have been advised of the possibility of such damages, and in no event will MIDIMAN's liability for any damages to the purchaser or any other person exceed the price paid for the product, regardless of any form of the claim. MIDIMAN specifically disclaims all other warranties, expressed or implied. Specifically, MIDIMAN makes no warranty that the product is fit for any particular purpose. [. . . ]