User manual M-AUDIO PROJECTMIX I-O QUICK START GUIDE

[. . . ] The computer will automatically display the interactive install screen shown in picture . If your computer fails to launch the installer, manually start the installer by clicking on Start>My Computer>FireWire Series. Select ProjectMix I/O from the drop-down menu and click "Install" to begin copying files. Follow the driver installer's on-screen direction prompts. [. . . ] Double-click the CD icon when it appears on your desktop to view the contents of the CD. Double-click the "Open Me" icon to launch the driver selector shown in picture . Select ProjectMix I/O from the drop-down menu on the welcome screen then click "Install. " The driver installer will launch. Follow the on-screen direction prompts ( ). When the installer has finished the installation, shut down your computer. After your computer is off, connect the ProjectMix I/O to your computer's FireWire port and the included power supply to a power outlet, then power the ProjectMix I/O on. When the computer has fully booted, your ProjectMix I/O will be ready to use. 1 ProjectMix I/O Quick Start Guide Connecting Your Equipment to the ProjectMix I/O English < The ProjectMix I/O has multiple audio outputs which can serve a number of purposes. However, the analog Outs 1 & 2 will always serve as your default left and right outputs. Please connect Outs 1 & 2 to the left and right channels, respectively, of your speakers, mixer, or other monitoring system. < You may also connect a pair of headphones to one of the headphone jacks on the front of the unit allowing for monitoring or pre-listening in private. < The eight 1/4" line level inputs on the back of the ProjectMix I/O accept line-level signals, such as those from keyboards, mixers, and CD players. The XLR connectors above the line inputs are for use with microphones. Use the Mic/Line selector switch to activate either the 1/4" or the XLR input for the individual input channels. In addition to this, you can use the instrument input on the front to record to channel one from sources like electric guitars or basses. To enable the front panel instrument input, set the MIC/LINE selector switch for channel 1 to LINE (down position) and then activate the Instrument input selector switch (down position). For more detailed information and an explanation of all available inputs and outputs, including digital formats, please refer to the ProjectMix I/O User Guide located on the FireWire Driver CD. Using the FireWire Control Panel On a PC, you can access the ProjectMix I/O Control Panel by double-clicking the M-Audio icon in your computer's system tray ( ). For Mac OS X users, the Control Panel can be launched from the icon found in the System Preferences panel ( ). The default settings for the ProjectMix I/O Control Panel will ensure that normal audio playback is routed to the analog Outs 1 & 2 of the ProjectMix I/O and to the first headphone output. The Control Panel will allow you to change the output routings when necessary, as well as set the function of the assignable level controller (by default, the level controller will adjust the output volume) and select digital sync options. [. . . ] This is done by holding down one of the following buttons while powering the unit on: 1. Pan Additional Information and Support English We recommend checking the M-Audio website regularly for driver updates and additional information. The web address for the site is www. m-audio. com. You'll find links to drivers, news stories, FAQs, additional products, and tech support. Keep this button held down after powering the ProjectMix I/O on until you see a confirmation message on the LCD screen. [. . . ]