User manual MACH SPEED CARTUNES MAX

[. . . ] If you have any problems while using this product, please contact our technical department at mssupport@machspeed. com. We appreciate your support and cooperation. Mach Speed Technologies is not responsible for any loss of personal data or damage caused by a malfunction of the hardware, firmware, physical damage, improper replacement of the battery as well as improper working conditions. To avoid the loss of your data, please back files up on your computer as often as possible. [. . . ] The CarTunes will automatically power on and begin to play. If you do not connect external media, the CarTunes will play the files loaded on its flash memory. Tune your car radio to the station corresponding with the CarTunes' displayed station to listen. Press the Play/Pause Press Note: or Press the PREV key to make the music pause or play; or NEXT key to select the previous track or the Next track. key to select the last frequency or the next frequency; 1) Please ensure that you set the CarTunes frequency to a station not used locally, or you will 2) Ensure that you have your car's radio tuned to the same frequency as listed on the CarTunes experience interference while listening. 2. Insert the machine to your car's cigarette lighter socket. Use the LINE-IN connector to connect your CarTunes and external MP3 CarTunes, using the smaller of the two connections for the CarTunes and the larger of the two connections to the MP3 CarTunes' line out or headphone jack. When your CarTunes detects the MP3 CarTunes, it will automatically begin transmitting the audio received from it. Note: 1) When using this function, the CarTunes will be transmitting the audio, but the audio files will come from the MP3 CarTunes. 2) When using this function, the play/pause, and track navigation features are controlled by the MP3 3 CarTunes. The play/pause and track navigation buttons on your CarTunes will be non functional. 3) If the LINE-IN connection is disconnected, your CarTunes will automatically begin transmitting from its internal memory again, and the play/pause and track navigation buttons will be functional again. Transferring songs to the CarTunes/USB Mode There are two methods of transferring songs to the MP3 CarTunes: Using Windows Media CarTunes, and the copy and paste method. Connect the MP3 CarTunes to a working USB port 2. When the CarTunes is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called "Safely Remove Hardware". 3. Go to the "My Computer" section of your computer. In there you will find a section called "Devices with Removable Storage". 4 4. Locate the drive created by the unit, generally just called "Removable Disk", with a letter in parenthesis. Drive letters vary depending on your system configuration. Open the drive by either double left clicking on the drive itself, or by right clicking on the drive, then left clicking on the "Open" option on the menu. 5 6. Locate the music stored on your computer. Generally this is stored in the "My Music" folder of your computer. NOTE: if you are unable to locate the music on your computer, click on start, search, files and folders, then search for "*. MP3, *. WMA". 7. Once you have located the song files, you can right click on the song itself, and select "Copy". [. . . ] Left click on the gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 10 2. Once you have clicked this icon, you can select which drive to disconnect from the computer. 3. Left click on the drive letter you wish to connect, and your computer will "eject" it. [. . . ]