User manual MACH SPEED RAVEN

[. . . ] Raven User's Manual Interface 1. INDICATOR LED- Indicates whether the player is on and playing 2. [. . . ] · Press and hold the Play/Pause button for three seconds to power the unit on. The indicator light on the Raven will glow purple. · Briefly press the Play/Pause button to begin playing a file. Briefly pressing the Play/Pause button again will pause the song. · Press and hold the FWD/VOL+ button to increase the volume. · Press and hold the BCK/VOL- button to decrease the volume. · If you press and hold the Play/Pause button to power off your Raven while playing a song, the Raven will remember what part of which song you were on and will resume playing that song when powered back on. 2 Connecting to your PC and Transferring files 1. Connect the MP3 player to a working USB port 2. When the unit is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 3. Go to the "My Computer" section of your computer. In there you will find a section called "devices with removable storage" 4. [. . . ] This will transfer the song on to your MP3 player. 7. Repeat step 6 for as many songs as you want to copy on to the unit. Troubleshooting For Troubleshooting and Frequently asked Questions, please visit: www. machspeed. com/tech/FAQRAVEN/ravenfaq. htm 4 Specifications Outside Dimensions Weight Computer interface Memory size Battery lifetime 85. 15mm(L)×25. 50(W)×16. 30mm(H) 25. 0g(without battery) Full speed USB2. 0 (Read 1000KB, Write 800KB) 128M-2GB up to 6 hours Earphone max (L)10mW+(R)10mW(32Ohm) power MP3 bit rate 32 bps-320 bps WMA bit rate 64 bps-192 bps Frequency 20Hz-20KHz response Signal to Noise 85dB ratio MP3, WMA -5~40 Celsius Degree Windows98SE/ME/2000/XP/Mac OS 10, Linux2. 4. 2 MP3 Player, USB cable, CD driver, User's manual, Warranty card, Earphone, 1xAAA battery MP3, WMA Music formats supported Temperature range Operating system Packing contents 5 [. . . ]