User manual MACH SPEED TRIO V7000

[. . . ] Congratulations on purchasing your Trio Personal Media Player!To get the most out of your purchase, please take the time to carefully read through this manual. Foreword If any problems occur during while using your Trio, please feel free to contact Mach Speed technical support at 580-272-0035, or by sending an email to mssupport@machspeed. com. Thank you for your support and cooperation! Mach Speed Technologies bears no responsibility for any damage or loss of personal data due to misuse of software and/or hardware, damage to the player caused by human factors, replacement of battery, or other unforeseen circumstances. To prevent loss of your data, please backup your data regularly. [. . . ] Connect the MP3 player to a working USB port. When the unit is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop). The icon will be called safely remove hardware. 3. Go to the "My Computer" section of your computer. In there you will find a section called "devices with removable storage" 10 4. Locate the drive created by the unit, generally just called Removable Disk, with a letter in Parenthesis. Drive letters vary depending on your system configuration. Open the drive by either double left clicking on the drive itself, or by right clicking to open the option menu then left click on the desired drive. 6. Locate the music stored on your computer. Generally this is stored in the "My Music" folder of your computer. NOTE: if you are unable to locate the music on your computer, click on start, search, files and folders, then search for "*. MP3, *. WMA". 11 7. Once you have located the song files, you can right click on the song itself, and select "copy". Open the removable disk drive, right click on in the empty space, and select Paste. This will transfer the song on to your player. 12 8. Repeat step 7 for as many songs as you want to copy on to the unit. NOTE: MAC Computers When connected to your MAC computer, the device will act as a removable drive. Main menu: The Main Menu allows you to select the different Modes of the device. Use the Back and Forward buttons to select the different modes, and then the Up and Down buttons to select the different parameters of the Mode. When you highlight the parameters you wish to adjust, press the PLAY button to enter. 13 Settings: 14 Output Select Output: Allows you to select whether to display through one of the TV out connections, or the onboard LCD. NOTE- if you select TV in this mode, the LCD will power off, and will not power back on until you have changed this setting (which you will need to do when connected to a TV). TV Format: Allows you to select which TV out component you are using; Composite, SD (standard definition) Interlace. This option will not take effect until you select "TV" in the Select Output option Battery information: Displays battery related information, including: voltage, current, current battery state (charging or use), the remaining power, and estimated battery life. [. . . ] If you select a folder, press PLAY to enter the folder, then use the Up and Down buttons to select a file, and PLAY to view it. 20 While a video file is playing: Press the Up or Down buttons to view the previous or next picture Press the PLAY button to switch to slideshow mode, or return to normal picture viewing Press and hold the Forward button to rotate the image 90 degrees Briefly press the forward button to enter the Photo submenu When Viewing photos, Press the "VOL + / VOL-" key to zoom in and out. When zoomed in, Press the Up, Down, Forward and Back buttons to move around. When zoomed, briefly press the PLAY button to return to original size. Photo Submenu Slideshow Time Allows you to select the length of time that an image is displayed when in slideshow mode Switch Mode Allows you to select several effects displayed when switching between images Sequence Allows you to "shuffle" your images Image Info Displays the current images information including, file name, size, resolution, format, color depth, aperture, and shutter Set as wallpaper Allows you to set the current image as a wallpaper. [. . . ]