User manual MACKIE ART300 DATASHEET
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MACKIE ART300. We hope that this MACKIE ART300 user guide will be useful to you.
Lastmanuals help download the user guide MACKIE ART300.
You may also download the following manuals related to this product:
MACKIE ART300 QUICK START (212 ko)
Manual abstract: user guide MACKIE ART300DATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] Art Series
I The same careful acoustic design and advanced
materials used in the ART active speakers have been utilized in the ART300 passive speaker. Combining high efficiency, high power handling and excellent sonic performance, the ART300 provides practical solutions for permanent installation applications. I The two-way design consists of a 12" woofer that uses a massive magnet structure for accurate bass reproduction and a CD horn loaded to a 1" exit compression driver. [. . . ] Coverage Angle (6 dB): 60Hz19kHz 195Hz17kHz 80°, averaged 1kHz to 10kHz 75°, averaged 1kHz to 10kHz 10. 0 (10), averaged 1kHz to 10kHz 101dB 1W @ 1m 132dB @ 1m 300W, RMS; 1200W Peak 450W 8 Dynamic 1. 8kHz, 12dB/octave
ART300
Vert. Coverage Angle (6 dB): Directivity Factor; Q(DI): System Sensitivity1: Rated Maximum Peak2: System Input Power Rating2: Recommended Amplifier3: System Nominal Impedance: HF Protection: Crossover: Transducers Low-Frequency: High-Frequency: Physical Enclosure:
12" (300mm) woofer with 3" (76mm) voice coil Polynomial horn-loaded 1" (25mm) exit compression driver
Gray, semi-trapezoidal, reinforced polypropylene Mounting: Four M10 metal threaded inserts, 1. 375" (35mm) lockable stand mount Grille: Protective perforated steel grille with foam backing Input Connectors: 2 x NL4 Speakon® connector plate Dimensions (HxWxD): 24. 42" x 15. 36" x 12. 29" (620mm x 390mm x 312mm) Weight: 39. 7lbs. (18kg) Options ART A-2 ART A-5 ART A-7 ART A-11
1 2
Wall mount bracket, black Swivel, tilt, wall mount hardware, black Full front metal grille, black U-bracket, black
Measured on axis in the far field with 1 watt (2. 83 V RMS, 8) input and referenced to 1 meter distance using the inverse square law. Listed sound pressure represents an average from 300Hz to 3kHz. RMS using 20Hz to 20kHz, PN Spectrum, Peak for 2 hours with +6 dB crest factor. 3 Recommended Amplifier is a power capability value that should be taken as a guide.
2
O FoF66 PAGES S PAGE
ART300 Two-Way Speaker System
ART300 Vertical Polars
200Hz 250Hz 0° 0° 315Hz 400Hz
500Hz 630Hz 800Hz 1kHz
1. 25kHz 1. 6kHz 0° 2kHz 2. 5kHz 0°
3. 15kHz 4kHz 5kHz 6. 3kHz
Vertical Off-Axis Frequency Response (UP)
8kHz 10kHz 0° 12. 5kHz 16kHz
Vertical Off-Axis Frequency Response (DOWN)
3
O FoF66 PAGES S PAGE
ART300 Horizontal Polars
0°
0°
200Hz 250Hz 315Hz 400Hz
500Hz 630Hz 800Hz 1kHz
0°
0°
1. 25kHz 1. 6kHz 2kHz 2. 5kHz
3. 15kHz 4kHz 5kHz 6. 3kHz
Horizontal Off-Axis Frequency Response
0°
8kHz 10kHz 12. 5kHz 16kHz
4
O FoF66 PAGES S PAGE
ART300 Two-Way Speaker System
Frequency response is measured on-axis at a distance referenced back to 1m at 1-watt drive. Shown as a half space (2) environment.
Beamwidth vs. Frequency
Directivity Index
12. 29" (312mm)
8. 35" (212mm)
14. 22" (361mm)
14. 18" (360mm) 7. 44" (189mm)
3. 58" (91mm)
7. 36" (187mm)
10. 20" (259mm)
12. 29" (312mm)
BOTTOM
SIDE
15. 36" (390mm) 15. 36" (390mm) 6. 69" (170mm)
8. 67" (220. 0mm) 16. 98" (431mm) 24. 42" (620mm) 6. 25" (158. 7mm)
22. 25" (565. 2mm)
9. 50" (241. 3mm) 5. 25" (133. 4mm)
FRONT
REAR
5
O FoF66 PAGES S PAGE
SPEAKER
ART300 Two-Way Speaker System
Architects' and Engineers' Specifications
The loudspeaker shall be a self-contained unit, housed in a vented, reinforced polypropylene enclosure and consisting of: (1) a 12 inch low-frequency, cone driver, (2) a 80° x 75°, high-frequency, constant-directivity polynomial horn and horn-loaded, 1 inch compression driver, (3) passive crossover network. The drivers shall be crossed over at 1. 8kHz by a 2-pole, passive network that contains equalization for the constant directivity horn and shall present a nominal 8 load to the power amplifier. When measured (500Hz16kHz) the directivity factor shall be at least 10. 0. The loudspeaker shall be capable of operating continuously with a pink noise signal delivered at 300W RMS. It shall produce at least 101dB SPL (300Hz3kHz) at 1m with an input of 1W RMS. Its peak power handling capability shall not be less than 1200W peak, producing 132dB SPL (1m, anechoic). The nominal frequency response of the system shall be 195Hz17kHz ±3dB. [. . . ] and are registered trademarks of Mackie Designs Inc. Mackie Industrial is a trademark of Mackie Designs Inc. 910-170-10 Rev. B
6
O FoF66 PAGES S PAGE [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MACKIE ART300
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MACKIE ART300 will begin.
