User manual MACKIE BABY HUI

[. . . ] Baby HUI User's Guide WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT RISK OF ELECTRIC SHOCK DO NOT OPEN SERIAL NUMBER MANUFACTURING DATE EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL. AVIS: RISQUE DE CHOC ELECTRIQUE -- NE PAS OUVRIR UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE. DEBRANCHER AVANT DE REMPLACER LE FUSIBLE REPLACE WITH THE SAME TYPE FUSE AND RATING. DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE IN MIDI OUT EXTERNAL POWER ON OFF BABY THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC "MACKIE" AND THE "RUNNING MAN" FIGURE. CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC. [. . . ] You will notice that the screen has channel strips that all follow the movements of Baby HUI's controls. Thus, you can use the Mixer Display to verify that the software is "seeing" your controls and reacting correctly to your use of Baby HUI. A second press of the button either closes the Mixer Display or makes it inactive in the software. This is a single button undo command that tells the software to undo the last thing you did. This button performs the same common keyboard commands CTRL+Z (for PCs) or APPLE+Z (for Macs). The first push of Baby HUI's Undo Button will undo the last command, and a second push will redo the last command. TIP: Use Undo/Redo right after an automation pass to make a quick A/B comparison of your moves and save yourself the time of going back later. SHIFT This is the one button on Baby HUI that requires some understanding to use correctly. The SHIFT button is a "Modifier, " which means it is used in conjunction with other buttons and knobs on Baby HUI. When pushed by itself, the SHIFT Button does nothing. Only when held down and another parameter is activated does the Shift function take place. Notice the label of the SHIFT Button has the text "SHIFT" enclosed in a white box. The white box labeling is a visual association to all of Baby HUI's shift-supported controls. So, by holding down the SHIFT button and pressing a shift-supported control, you engage the function labeled in the corresponding white box underneath that control. To disable a shift-supported function, simply hold down the SHIFT button and press the control associated with that function. Below is a chart of what happens when you hold down the SHIFT button and engage the listed controls: EDIT Pressing this button opens the Edit Display in your software. Most software Edit Displays have their tracks laid out horizontally, with track headers along the left hand side of the screen, a virtual "playback head" (usually represented by a vertical line) crosses from left to right across the screen as the transport is used, giving the interface a tape deck-style look. TIP: The tracks in the Edit Display have modes that can be set to display different information, i. e. , recorded data, track volume, panning, etc. To help you use Baby HUI, we recommend using the level/volume data display as a visual accompaniment to writing automation with Baby HUI's faders. You will "see" the movements you make with Baby HUI either in real time or calculated after the automation pass, depending on your software and computer's resources. CONTROL Push Encoder Bypass/Off Read Write Touch RTZ END BANK (Left) BANK (Right) FUNCTION Record Arms the selected track Arms faders for automation Arms Mutes for automation Arms Pans for automation Arms Send Levels for automation Begins a new selection area Ends a new selection area Moves channel controls left by one channel Moves channel controls right by one channel LABEL (in box) REC RDY FADERS MUTES PANS SEND LVLS IN OUT CHANNEL (Left) CHANNEL (Right) 8 Baby HUI User's Guide RTZ END BANK SELECT IN OUT CHANNEL Navigation Section This section gives you quick access to navigational shortcuts designed to help you "get around" your DAW, which sometimes can be the most time-consuming aspect of using a computer for audio production. This section has four buttons and a small two-character display. controlling channels 1-8 and you push the right Bank Select button, Baby HUI will now control channels 9-16. When considering the extensive numbers of channels supported by many of today's DAWs, bank selecting is a key navigational tool on Baby HUI. RTZ RTZ stands for Return to Zero and returns the playback head (in software) "to the top" of your session (as they say in musician-land) or to 00:00:00:00. Channel Select (Left and Right) Holding down the SHIFT button and pressing the left or right Channel Select button "jumps" Baby HUI over to the next adjacent channel on either the left or right side of its current location. For example, if Baby HUI is currently controlling channels 1-8 and you hold SHIFT and push the right Channel Select button, Baby HUI will now control channels 2-9. [. . . ] Call Mackie Tech Support at 800-258-6883 (8 AM to 5 PM, Pacific Time) to explain the problem. If it can't be solved over the phone, you will be issued an RA (Return Authorization) number. You must have an RA number before you can obtain service from the factory. Pack the Baby HUI in the original box, with the original foam innards or other packing materials. [. . . ]