User manual MACKIE CFXMKII DIAGRAMS

[. . . ] Repair Service for the CFX MKII Series mixers is available at a factory-authorized service center. Service for Mackie mixers living outside the United States can be obtained through local dealers or distributors. [. . . ] You must have an Service Request Number before you can obtain service at a factory-authorized service center. Keep this owner's manual and the detachable linecord. We don't need them to repair the mixer. Pack the mixer in its original package, including endcaps and box. When you call for the Service Request Number, please let Tech Support know if you need new packaging. Mackie is not responsible for any damage that occurs due to non-factory packaging. Include a legible note stating your name, shipping address (no P. O. boxes), daytime phone number, Service Request Number, and a detailed description of the problem, including how we can duplicate it. Write the Service Request Number in BIG PRINT on top of the box. Product shipped without the Service Request Number will be refused. [. . . ] This paragraph does not necessarily apply to non-warranty service. Note: You must have a sales receipt from an Authorized Mackie Dealer to qualify for a warranty repair. 5. 6. 7. 8. APPENDIX B: Technical Info Specifications CFX12, CFX16, CFX20 MKII Mixer Section Frequency Response Mic Input to any Output (Gain at 0 dB): +0, ­1 dB, 32 Hz to 20 kHz Input Gain Control Range Mono Channels Mic In: Line In: Stereo Channels Line In: +5 dB to +50 dB ­15 to +30 dB ­20 to +20 dB Phantom Power +48V DC Distortion THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Output: < 0. 05% @ +4 dBu output Equalization Low Cut: 100Hz, ­18 dB/octave Mono Channel EQ: High ±15 dB @ 12 kHz ±15 dB @ 100 Hz to 8 kHz Mid Low ±15 dB @ 80 Hz Stereo Channel EQ: High ±15 dB @ 12 kHz High Mid ±15 dB @ 3 kHz Low Mid ±15 dB @ 400 Hz Low ±15 dB @ 80 Hz Graphic EQ (9 bands): Q = 1. 414, ISO octave centers ±15 dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz Noise 20 Hz to 20 kHz BW (150 source impedance) Equivalent Input Noise (EIN): ­127 dBu Residual Output Noise: Main, Monitor, and Effects outputs Channel & Master levels off ­95 dBu Common Mode Rejection Ratio (CMRR) 60 dB @ 1 kHz, Gain @ 0 dB Mixer Rated Output Main, Sub, Aux, & Efx: Maximum Rated Output: +4 dBu +20 dBu Crosstalk Adjacent Inputs or Input to Output: ­90 dB @ 1 kHz Fader Off ­90 dB @ 1 kHz Mute Switch and Break Switch Mute ­80 dB @ 1 kHz Maximum Input Levels Mic Input: ­28 dBu, Gain @ +50 dB +18 dBu, Gain @ +6 dB Line Input: ­8 dBu, Gain @ +30 dB +38 dBu, Gain @ ­15 dB Insert Input, Stereo Line Input, Tape Input, and Effects Return: +20 dBu 21 16. 0 in/406 mm Maximum Voltage Gain Mic Input to Insert Output: Tape Output: Sub Output: Main Output: Aux Send: Line Input to Insert Output: Tape Output: Sub Output: Main Output: Aux Send: Stereo Line Input to Tape Output: Sub Output: Main Output: Aux Send: Tape Input to Main Output: Effects Return to Main Output: 5. 0 in/127 mm Input Impedance 50 dB 66 dB 66 dB 76 dB 71 dB 30 dB 46 dB 46 dB 56 dB 51 dB 40 dB 40 dB 50 dB 45 dB 30 dB 30 dB Mic Input: 3k, balanced Line Input: 40k, balanced Insert Input, Stereo Line Input, Tape Input, and Effects Returns: 10k, unbalanced 18. 4 in/467 mm CFX12 WEIGHT 17. 8 lb/ 8. 1 kg Output Impedance Main Output, Insert Output, Tape Output, Sub Output, and Effects Sends: 150 Digital Effects Resolution: Number of Presets: 16-bit, 2-channel 16 22. 9 in/ 582 mm CFX16 WEIGHT 21. 0 lb/ 9. 5 kg Channel Level Set LED (Sensitivity) 0 dBu (normal operating level) VU Meters Main L/R 12 segments: Clip, +10, +7, +4, +2, 0, ­2, ­4, ­7, ­10, ­20, ­30 CFX20 WEIGHT 24. 3 lb/ 11. 0 kg Disclaimer Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice. 26. 8 in/681 mm 15. 7 in/400 mm 4. 6 in/117 mm 2. 1 in/53 mm 16. 2 in/412 mm SUB 1 OUT Block Diagram CFX MKII Series SOLO CONTROL SUB 3 SUB 4 SUB 2 +48 VDC GLO BAL TO PHAN M PO WER LEFT ASSIGN PHANTOM POWER SOLO INSERT GAIN 2 1 3 100 Hz HPF LOW CUT LEVEL SET LO MID FREQ HI 80 12K FADER 3-4 MUTE SUB 2 OUT PAN 1-2 RIGHT ASSIGN MAIN INSERT TAPE OUT LEFT BREAK LEFT ASSIGN 63 125 250500 1K 2K 4K 8K 16K 3 MAIN LEVEL PRE-P0ST AUX 1 SUB 3 OUT RIGHT ASSIGN TAPE IN LEFT SUBWOOFER OUT 2 1 3 2 1 MAIN OUT LEFT MIC/LINE IN MONO CHANNELS AUX 2 EFX 1 EFX 2 RIGHT MAIN AUX 2 SOLO SUB 1 EFX 2 EFX 1 AUX 1 LEFT MAIN TAPE LEVEL LEFT ASSIGN TAPE IN RIGHT RIGHT ASSIGN SUB 4 OUT 75 Hz LPF SOLO MAIN INSERT MAIN LEVEL 2 63 125 250500 1K 2K 4K 8K 16K BREAK 1 LO LEFT MID MID HI 12K 1-2 3-4 LEFT ASSIGN TAPE OUT RIGHT 80 800 3K MAIN OUT RIGHT 3 LINE IN STEREO CHANNELS GAIN LO MID MID HI 12K MUTE PAN MAIN 80 800 3K RIGHT RIGHT ASSIGN STEREO EFX RETURN 1 LEFT AUX 1 PRE/POST PFL SIGNAL TO PHONES AUX 2 EFX RETURN 1 EFX 1 STEREO EFX RETURN 1 RIGHT RUDE SOLO LIGHT UTILITY OUT LEFT EFX 2 +5 VDC EFX SEND 2 EFX LEVEL SET EFX BYPASS SOLO CONTROL (ACTIVE LOW) EFX TO MAIN MIX +5 VDC L EFX SEND 2 STEREO EFX RETURN 2 RIGHT PHONES LEVEL EFX TO AUX 1 AUX SEND 1 BOTHELL MONROE TO LEFT MAIN SOLO ON PFL PHONES STEREO EFX RETURN 2 LEFT FROM EFX TO MAIN MIX SOLO OFF UTILITY LEVEL UTILITY OUT RIGHT EFX SELECT TIME/RATE DAMPING/DEPTH EMAC DSP EFX TO AUX 2 TO RIGHT MAIN R AUX SEND 1 AUX SEND 2 WOODINVILLE EXIT PFL SIGNAL TO LEFT METER 22 10 7 4 2 0 2 4 7 10 20 30 SOLO OFF EFX WIDE AUX SEND 2 EFX SEND 1 EFX FOOT SWITCH EFX SEND 1 SOLO CONTROL (ACTIVE LOW) SOLO ON EFX BYPASS MACKIE CFX MKII SERIES BLOCK DIAGRAM (#122104CJM/DF) 22 [. . . ]