User manual MACKIE D2

[. . . ] 2-Channel DJ Mixer with FireWire Option OWNER'S MANUAL MIC OL SIG +3 +50 48V OFF ON O O PGM U 1 PGM SOURCE LINE/ PHONO 2 U CONTROL MAIN SOURCE LINE/ PHONO MAX CD CD O O MAX O O MAX LEVEL LEVEL LEVEL LEVEL EQ U EQ HIGH KILL +10 EQ HIGH KILL +10 BOOTH STEREO MONO U HIGH -15 +15 O O MAX LEVEL FX U MID -15 +15 MID KILL +10 KILL +10 MID O O +15 SEND U LOW -15 +15 LOW KILL +10 KILL +10 LOW O O +15 RETURN PHONES PGM MAIN U ON FX FX O O MAX LEVEL PGM SOURCE PAN BAL BAL 1 2 L R LR LR PGM 1 PGM 2 TRANSFORM TRANSFORM MAIN L OL 10 7 4 2 0 2 4 7 10 20 30 REVERSE OL 10 7 4 2 0 2 4 7 10 20 30 REVERSE R OL 10 7 4 2 0 2 4 7 10 20 30 REVERSE infinium contact-free cross-fader A B d. 2 2-channel DJ Mixer Important Safety Instructions 1. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Turn it to minimum before connecting and putting on headphones. Increase it slowly to a safe listening level. STEREO/MONO Switch With this switch up, the BOOTH outputs [8] provide a stereo left and right output of the main mix. Push the switch in to combine the left and right signals to mono if you only have one booth monitor speaker. 38. PGM/MAIN Switch Use this switch to select the source for the headphones signal. When the switch is up (PGM position), the signal is tapped just after the BAL control [30] on the PGM channels. You can use the PGM SOURCE crossfader [39] to fade between PGM 1 and PGM 2. When the switch is down (MAIN position), the signal is tapped from the Main Mix bus, just before the MAIN LEVEL control [32]. 35. FX SEND LEVEL Control This knob controls the amount of signal being sent to FX SEND outputs [6]. Adjust this knob to provide an appropriate input signal level to your external effects processor (or whatever you have connected to the FX SENDs). It ranges from off to +13 dB at maximum. Note: The FX SENDs are affected by the TRANSFORM switches [40], so if you mute a PGM channel with the TRANSFORM switch, the FX SEND for that PGM channel is muted as well. 39. PGM SOURCE Cue Crossfader When the PGM/MAIN switch [38] is up (in the PGM position), you can use this crossfader to listen to PGM 1 and PGM 2 in the headphones. When the crossfader is all the way to the left, PGM 1 is heard in the headphones. When the crossfader is all the way to the right, PGM 2 is heard in the headphones. When the knob is in the center, the headphones get an even mix of PGM 1 and 2. Note: When the PGM/MAIN switch is down (MAIN position), this control has no effect on the PHONES output. 36. FX RETURN LEVEL Control This adjusts the signal level coming from your external effects processor via the FX RETURN jacks [7]. Use it to adjust the processed signal going to the main mix bus. It ranges from off to +13 dB at maximum. 14 d. 2 DJ Mixer Program Output Section 40. TRANSFORM Switch The transform switch has three positions: Latching, Center, and Momentary. When the switch is Latched, this program's signal is on, and passes through to the outputs. [. . . ] The address of your closest authorized service center will be given to you by Technical Support. IMPORTANT: Make sure that the Service Request Number is plainly written on the shipping carton. LOUD Technologies reserves the right to inspect any products that may be the subject of any warranty claims before repair or replacement is carried out. LOUD Technologies may, at our option, require proof of the original date of purchase in the form of a dated copy of the original dealer's invoice or sales receipt. [. . . ]