User manual MAGELLAN 750NAV OFFROAD

[. . . ] Once Off-Road mode is entered, the unit is functionally transformed into a product, which works just like Magellan's famous hand held GPS receiver. Features Enter navigation points (waypoints) by marking a waypoint by the systems current position, using the systems cursor, or by entering latitude and longitude coordinates. The maximum number of waypoints the system is capable of saving into memory is 100. Create routes by inserting waypoints into a route list. The 750NAV, guides the user from point to point by visually connecting the waypoints with highlighted lines in the order of the route lists. [. . . ] The blue track will remain on the map display until cleared from the systems memory. See page 7 for instructions on clearing Track History. To turn this feature on or off just highlight Track On in the Off-Road options menu and press ENTER. When the color of the X changes to blue, tracking is turned on. Ext. Detail Track On -4- The Extended Detail feature will display heading and bearing information on the map screen. To turn this feature on or off simply highlight Ext. Detail in the OffRoad options menu and press ENTER. When the color of the X changes to blue the feature is on. Ext. Detail Bearing Information Lat/Long Press ENTER on Lat/Long to change the format for the latitude and longitude coordinates. Advanced Press ENTER on Advanced to access Arrival or XTE Alarm setup. -5- The XTE Alarm is the cross track error alarm. While in route guidance mode, the XTE Alarm will chime when you are off track by the selected distance. The distance is adjustable between off and 1 mile. Or from off to 1. 5 kilometers, if using the metric system. Press ENTER on XTE Alarm to adjust the distance for the cross track error. . The Arrival Alarm will chime after driving past each waypoint and upon arrival to the final waypoint in a route. The arrival alarm distance is adjustable from 100 feet to 1 mile. Or from 30 meters to 1. 5 kilometers, if using the metric system. To adjust the distance for the Arrival Alarm, press ENTER on Arrival Alarm. After changing the XTE or Arrival Alarms scroll to save and press ENTER. -6- Clear The Clear feature will generate an Off-Road Clear list. From this screen Track History, Routes, or Routes/Waypoints can be cleared from the systems memory. To generate the clear list, press ENTER on Clear. Pressing ENTER on Track History will prompt the user with a yes or no to clear Track History. Pressing ENTER on Routes will prompt the user with a yes or no to clear Routes. Pressing ENTER on Routes/Waypoints will prompt the user with a Yes or No to clear Routes and Waypoints. -7- Pressing ENTER on All will prompt the user with a Yes or No to clear All of the Track History, Routes, and Waypoints. Start Using Off-Road Navigation Select the Off-Road Navigation icon from the main menu and press ENTER. Off-Road Selections Menu Setting Waypoints, Creating Routes, Next Waypoint, Reverse Route, and Inclinometer are all accessed in the Off-Road Selections Menu. Press ENTER from the Map View screen to arrive at the Off-Road Selections Menu. -8- Setting Waypoints Press ENTER from the Map View screen. To set waypoints from the current position, press ENTER on Mark By Position. After using the Mark By Position function the user may save the position name as WAY001. The next waypoint saved will be WAY002 and the numbers will increment after each waypoint is saved. The user may choose to name the waypoint to make it easier to identify the waypoint. [. . . ] When using True-View mode simply drive in the direction of the arrow to follow the route. The red triangle shows how far the vehicle is off route (works as a visual for the XTE Alarm). - 19 - Once the final waypoint in the list is navigated to, the you have arrived voice prompt is heard followed by 3 double chimes. Also a destination screen will be displayed showing the final waypoint name and the Lat/Long coordinates of the waypoint. To cancel route guidance, press the CANCEL key, move the cursor to yes and press ENTER. If you would like to route to a specific waypoint select Waypoints By Name, Waypoints By distance, or Waypoints By Time and press ENTER. Select a waypoint, Press ENTER. - 20 - Now select Route and Press ENTER. Inclinometer The inclinometer can be accessed in the Off-Road Selections menu. The pitch and roll readings of the vehicle will be displayed while driving. [. . . ]