User manual MAGELLAN MAP 330M

[. . . ] User Manual MAP 330/MAP 330M This User Manual provides the instructions for using the Magellan MAP 330 and the Magellan MAP 330M GPS receivers. Any reference to the MAP 330 in this User Manual applies to both receivers. Those areas that apply only to the MAP 330M will be noted. WARNINGS FOR SAFETY REASONS, THE DRIVER SHOULD NOT USE THIS DEVICE IN A VEHICLE WHILE IN MOTION TO ASSIST THE DRIVER TO NAVIGATE. Please do not try and change any settings on the MAP 330 while driving. [. . . ] The number displayed represents approximately 1/4 of the screen's width. Scale can be changed with the IN and OUT buttons. Track History Dotted line on the map displays the history of where you have travelled since the last time you cleared the Track History (see Clear Memory in the Reference Chapter. ) Data Fields These fields display navigational information for viewing on the Map screen. They are both customizable with 13 data types possible. Both of the data fields can be turned on or off allowing more viewable map area. Both features (customize and turning the data on/off) can be accessed from the MENU button. Optionally, using the customize function, the data fields can be replaced with the name of the street or intersection you are presently on. Position Mode Magellan MAP 330 GPS Receiver 25 Reference In the Cursor Mode, you are provided with a cursor that can be moved on the map. At the bottom of the display is the information for the position of the cursor relative to your present position. Also any points of interest that the cursor is over will be shown. To access the Cursor Mode, press any arrow on the keypad. A crosshair appears that can be moved with the arrow keys. To return to the Position Mode, press ESC . The cursor will disappear and the present position icon will appear centered on the map. Cursor Icon Map Scale Indicator Cursor Information Block Waypoint or Map Object Name Cursor Icon The Cursor Icon pinpoints the location you have selected by using the arrow keys. Map Scale Indicator Provides the scale for the map. The number displayed represents approximately 1/4 of the screen's width. Scale can be changed with the IN and OUT buttons. Waypoint or Map Object Name Whenever the cursor is over a map object, the name of the map object is displayed, otherwise the word "cursor" appears. The data shown in the information block is the heading and distance from your present position to the cursor. Cursor Mode 26 Magellan MAP 330 GPS Receiver Reference Setting the Map Detail -- The detail of the map can be set to highest, high, medium, low or lowest. This changes the zoom level that different map objects (cities, highways, labels, etc. ) are displayed. If you have set a zoom level and the display is too cluttered, set the map detail to a lower level; conversely set it to a higher level to view more detail. The default is Medium. From the MAP Screen MENU Highlight Map Setup ENTER Use arrows to highlight the "Detail" field ENTER Use arrows to select the desired Map Detail level ENTER NAV Map Screen Legend Present Position Cursor Panning Cursor Not Computing Fixes Waypoint Oceans State Lines Rivers Lakes Swamps Railroads Interstate Roads U. S. Routes Roads National Parks (Pointer ) (Crosshair ) (Hourglass) Displayed with the icon selected for that waypoint. - dark gray - black line - light gray - dark gray - light gray - light gray - double black line - thick black line - black line - light gray Magellan MAP 330 GPS Receiver 27 Reference Turning On/Off Display Waypoints -- Turns on or off the waypoints on the Map screen. [. . . ] If you are unsure of which datum to use, use WGS84. The value or setting automatically chosen by the unit unless otherwise directed. The estimated time of day the leg's destination waypoint will be reached. 75 COG Coordinates CTS Datum Default DST ETA Magellan MAP 330 GPS Receiver Appendix ETE Estimated Time Enroute. The estimated time remaining to reach the next waypoint in a route. [. . . ]