User manual MAGELLAN SPORTRAK

[. . . ] User Manual SporTrak Series of GPS Mapping Receivers . This manual covers both the SporTrakTM Map and the SporTrakTM Pro GPS receivers. All of the functions described in this manual apply to both receivers. The SporTrak Map has a 2MB basemap with an additional 4MB for data downloaded from MapSendTM products. The SporTrak Pro has a 9MB basemap and 23MB for data downloaded from MapSend products. WARNINGS FOR SAFETY REASONS, THE DRIVER SHOULD NOT USE THIS DEVICE IN A VEHICLE WHILE IN MOTION TO ASSIST THE DRIVER TO NAVIGATE. [. . . ] Selecting Map Items Turning On/Off Display Waypoints -- Turns on or off the waypoints on the Map screen. Default is On. From the MAP Screen Highlight Map Setup Use L/R arrows to select "Display" tab Use U/D arrows to select "Waypoints" Turning On/Off Track Lines -- As you move, your track history is normally displayed on the map screen represented by a dashed line. This function allows you to turn off or on these lines. Default is On. From the MAP Screen Highlight Map Setup Use L/R arrows to select "Display" tab Use U/D arrows to select "Track Lines" Turning On/Off Topographic Lines -- [Available only if a map has been uploaded from a Magellan MapSend Topo for the United States CD-ROM] This function will hide all topo lines and topographic information. Default is On. From the MAP Screen Highlight Map Setup Use L/R arrows to select "Display" tab Use U/D arrows to select "Topo Lines" Turning On/Off Displayed POI's -- [Available only if a map has been uploaded from a Magellan MapSend Streets and Destinations or MapSend Topo for the United States CD-ROM] Allows you to select which, if any, POIs that have been uploaded from a MapSend product to be displayed. Default is On. From the MAP Screen Highlight Map Setup Use L/R arrows to select "Display" tab Use U/D arrows to select POI Magellan SporTrak GPS Receiver 23 Reference Globally Turn Map Items On/Off -- If you have uploaded map data from a MapSend product, you will notice that the list of POIs can be extremely lengthy. To aide you in the customization of the display you can turn everything on or off globally. To turn off all map items, follow these instructions. From the MAP Screen Highlight Map Setup Use L/R arrows to select "Display" tab Use U/D arrows to select Clear All After you have turned off all of the map items, you can go back and just select the POIs that you want to view. Please note that this function will also turn off waypoints, track lines and, if applicable, topo lines. Be sure to turn these back on if you want to see them. Inversely, to globally turn on all of the map items, follow the above steps but select "Mark All" instead of "Clear All". Setting Up Map Data Fields -- The following options are available ONLY if you are in the Position Mode of the Map screen. If you are in the cursor mode, press the ESC key and the display will snap back to the Position Mode with the arrow icon displaying your present postion. (If you are not clear on which mode you are in, the simpliest way to determine it is to see what cursor is displayed; an arrow indicates Position and a crosshair indicates Cursor. If you press the ESC key and the display changes to another Nav Screen you were in the Position Mode and you can press NAV to return to the map. Turning Data Fields On/Off -- This option allows you to turn on or off the two information fields that are displayed on the Map screen. Turning these off allows for more of the map to be displayed. Default is SHOW. From the MAP Screen Highlight Hide Map Info or Show Map Info When Map Info is hidden and the map is in the cursor mode, the bearing (BRG) and distance (DIS) to the cursor is shown in the bottom left corner of the map replacing the scale. (Note: if you have uploaded topographic information from Magellan's MapSend Topo for the United States CD-ROM, the elevation at the cursor's location is displayed, not the bearing and distance. ) If the cursor happens to be on a map object, the name of the object is displayed. 24 Magellan SporTrak GPS Receiver Reference Selecting the Data Fields -- This function allows you to select which data fields are to be displayed. You can choose from Customize Fields, Street Information or, if topographic information is loaded, you can select Horizontal Profile or Terrain Projection. If you select either Horizontal Profile or Terrain Projection and you do not have topographic information loaded a warning screen is displayed. From the MAP Screen Highlight Customize Use U/D arrows to select desired information Two Data Fields Description -- This option displays two boxes at the bottom of the map that can display data that you choose. Displaying these data fields is the default for the SporTrak. [. . . ] The datum for the map you are using can be found in the legend of the map. If you are unsure of which datum to use, use WGS84. The value or setting automatically chosen by the unit unless otherwise directed. The estimated time of day the leg's destination waypoint will be reached. Magellan SporTrak GPS Receiver COG Coordinates CTS Datum Default DST ETA 74 Appendix ETE Estimated Time Enroute. [. . . ]