User manual MAGIMIX 11389 VERTUO

[. . . ] 16 10:48 EN FR Nespresso Vertuo is an exclusive system creating a perfect coffee, from the Espresso to the large Mug, time after time. Nespresso Vertuo machines are equipped with the unique Centrifusion® technology to gently extract a Mug, Gran Lungo or Espresso at the touch of a button. Each extracting parameter has been carefully defined by Nespresso coffee experts to ensure that all aromas from each Grand Cru can be extracted to give the coffee body and create an exceptionally rich and generous crema. COM - VOIR LA PAGE DES MACHINES These instructions are part of the appliance. [. . . ] Green light will rotate slowly during the barcode reading and pre-wetting phase. You can do this even when the machine is still heating up. The coffee will then flow automatically when the machine is ready. The machine will automatically recognize the inserted capsule and select the coffee preparation parameters and cup length defined by Nespresso coffee experts to extract the coffee blend at its best. NOTE: NOTE: 10 During the coffee preparation phase coffee will start to flow. GREEN light will rotate quickly during brewing. Steady GREEN light indicates that coffee brewing is ready. 11 To stop the coffee flow early, push the button. Steady GREEN light indicates that coffee brewing is ready. It will take less than 2 minutes before a flow comes out. The cleaning procedure will run automatically for 5 minutes. The procedure consists of 3 cycles of pumping water in, internal cleaning and water flowing from the outlet to complete. Indd 20 5 The procedure can be stopped at any time by pushing the button. The button will go to steady GREEN light when ready for brewing. To restart the cleaning process, follow the instructions starting at point 4. To brew a coffee, insert a capsule, push the lever down to close the machine and push the button. 16 10:48 RESET TO FACTORY SETTINGS / RÉINITIALISER LES PARAMÈTRES DE RÉGLAGE D’USINE NOTE: Choose special function by pressing the lever down: 1 time for "Descaling". 2 times for "Emptying the system". 1 Turn the machine "OFF" by pushing the lever down for 3 seconds. eteindre la machine en appuyant sur le levier pendant 3 secondes. 2 To enter "Factory settings" mode, push the button and the lever down at the same time for 3 seconds. ORANGE steady light indicates entry into the Special Functions menu. [. . . ] RED light blinking continuously and the machine head stops moving. The machine does not start and RED light blinking 2 times and goes back to Steady GREEN. The machine does not start and RED light blinking 3 times every 2 seconds and goes back to Steady RED. RED steady light and the machine is NOT running. [. . . ]