User manual MAGIMIX LE BLENDER

[. . . ] If the fitted plug has been cut from the power supply cord, it should be destroyed and replaced with an appropriate three pin plug in accordance with the following code : BLUE : neutral BROWN : live GREEN/YELLOW : earth The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter "N" or coloured BLUE or BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter "L" or coloured BROWN or RED. [. . . ] Always operate Blender with lid in place. The Blender is fitted with a 2 speed control switch. Use speed "1" for all normal blending preparations and use high speed "2" when a fine emulsion is required. To minimize possibility of spillage it is recommended that you limit the volume to one-half pint, completely remove the measuring-cap from the lid (this will allow expanding air present inside jug) and always start blending on lowest speed 1, then progress to desired speed 2. - To protect against electrical hazards, do not immerse the motor base in water or in other liquid. - Do not operate with a damaged cord or plug or after the unit malfunctions. return it to the nearest authorized service facility for repair. - Keep hand and ustensils out of jug while blending. The blade can not be removed from the bowl. Parts marked "*" are dishwasher safe, others must be hand washed. after cleaning and drying , reassemble as shown on drawing. To clean the motor base, unplug the power cord, wipe the surface with a damp cloth first, then with a dry cloth. [. . . ] 5 - Plug the power cord back into electrical outlet. We reserve the right to alter at any time without notice the technical specifications of this appliance. [. . . ]