User manual MAGIMIX LE MINI PLUS

[. . . ] To protect against risk of electrical shock do not immerse the food processor in water or any other liquid. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. Do not operate any appliance with a damaged cord or plug or after the appliances malfunctions, or is dropped or damaged in any manner. [. . . ] · Always attach plug to appliance and check that the control is OFF before plugging cord into wall outlet. To disconnect, turn the control to OFF, then remove plug from wall outlet. · Do not use appliance for other than intended use. · Never add to container while appliance is operating. · To ensure continued protection against risk of electric shock, connect to properly earthed outlets only. CAUTION - READ INSTRUCTIONS BEFORE USING 3 DESCRIPTION Pusher Feed tube Lid Locking mechanism Mini Bowl Bowl Handle Motor shaft Control panel Motor unit WARNING BEFORE USING YOUR APPLIANCE · Please ensure that the voltage indicated on the base of the machine corresponds with the mains voltage in your home. · The machine must always be connected to an earthed socket. · Always use the mains cord supplied by the manufacturer. · If the supply cord is damaged, it must be replaced by the manufacturer or its service-agent or a similarly qualified person in order to avoid a hazard. 4 STANDARD ACCESSORIES Stainless steel double-bladed knife. Reversible stainless steel slicing / grating disc and disc support. 4-mm grating disc and disc support. Egg whisk / Spatula Mini Bowl with stainless steel double-bladed knife. Citrus press with anti-splash arm and 2 cones for small and large fruit (1 cone fits inside the other) 5 FITTING THE BOWL 1. Place the bowl on the motor unit with the handle to the left hand side. 2. Turn the bowl anti-clockwise as far as it will go making sure it firmly locks into position. The handle will now be at the centre of the motor unit. 3. Place the chosen accessory in the bowl (see details on following page). 4. Position the lid, completely flat, by placing the feed tube to the left of the handle. The Mini Plus is now ready to use. IMPORTANT If the lid is not properly locked into position or if it is opened during preparation, the appliance will 5. Turn the lid in an anti-clockwise direction until the locking device clicks into position at the top of the handle. The safety rod is now in contact with the motor. cease to function, even if the "ON" switch has been pressed. 6 FITTING THE ACCESSORIES Stainless steel blade: place the blade directly in the bowl, over the motor shaft. Put the lid on, and lock into position. Discs: place the selected disc on the support, turning it gently in an anticlockwise direction. To slice: place the disc with its slicing edge facing upwards. To grate: Place the disc with its grating edges facing upwards. WARNING Always handle the highly sharpened stainless steel blade and discs with care. To mount or separate the disc and support, hold the edge of the disc with the cutting edge facing away from your fingers. Lower the support, fitted with a disc, onto the motor shaft in the centre of the bowl. Put the lid on and lock into position. 7 FITTING THE ACCESSORIES Egg whisk: place the egg whisk directly in the bowl on the motor shaft. Put the lid, on and lock it into position. 1. Mini Bowl: fit over the central spindle inside the large bowl. 2. The small metal blade also fits onto the support and locks into place when rotated in a slight anti-clockwise direction. 3. [. . . ] PULSE: Press this switch for pulse button. Keep the switch pressed; the motor stops the moment pressure on the switch is relaxed. It is normal that these items will become marked and possibly opaque with frequent use. The bowls, lid and blades are subject to wear and tear. [. . . ]