User manual MAGIMIX NESPRESSO M150

[. . . ] Ensure that the electrical cord does not come into contact with sharp or hot objects. do not disconnect the electrical plug by pulling on the cord. Avoid touching the electrical cord as well as any other part which may become hot during the use of the machine (steam nozzle, chrome portion of capsule holder). Keep the machine and the electrical cord out of children's reach. [. . . ] First prepare a Nespresso in a cappuccino cup filling it only one-third full. Remove the capsule holder from the spout ring, discard the used capsule and reinsert the empty capsule holder in the spout ring. press the steam / hot water switch to the position (16). Once the yellow temperature control light goes off, the machine is ready for use. Plunge the steam nozzle into the receptacle and turn the function knob to the position on the left (17). The yellow temperature control light will go on. Maintain the end of the nozzle under the surface of the milk during the entire procedure ensuring that it does not touch the base of the receptacle. stop the steam by turning the function knob to the «0» position. The yellow temperature control light will go off. Once the yellow temperature control light goes off, your machine is warmed up and ready for use. Remove the capsule holder from the spout ring and insert a capsule with the largest part towards the base (11). Reinsert the capsule holder in the spout ring by turning it from left to right without tightening with great force (12). The steam / hot water nozzle can become burning hot. The steam nozzle is useful in making frothed milk for a cappuccino, or for heating a liquid. Once your Nespresso is prepared, return the function knob to the «0» position. Remove the capsule holder from the spout ring and discard the used capsule (14). Pour approximately 1 dl of cold whole milk into a sufficiently high pot (of not more than 0. Turn the function knob again to the position on the left for just a second in order to eliminate any residual milk that otherwise can block the steam nozzle. Wipe the integrated frothing attachment with a clean damp cloth. The yellow temperature control light will go off. remove the receptacle and pivot the steam nozzle over the drip tray. Wipe the steam / hot water nozzle with a clean damp cloth immediately after its use. [. . . ] Once the yellow temperature control light goes off, the machine is ready for use. Important: To extract a Nespresso after having used the steam, let the machine cool down. To do this, insert the empty capsule holder in the spout ring, place a receptacle under the coffee spout and run the equivalent of one or two large cups of water by turning the function knob to the position on the right. Once the yellow temperature control light goes off, the machine is ready for use. [. . . ]