User manual MAGIMIX NESPRESSO M200

[. . . ] This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply. Remove plug from from socket if not in use for long periods - holiday etc. [. . . ] Remove plug from from socket if not in use for long periods - holiday etc. Check that the voltage quoted on the rating plate is the same as your voltage. - Connect the appliance only to power sockets with protective earth. The use of incorrect connection voids warranty. Place on a flat, stable heat-resistant work surface away from water splashes and any heat sources. Do not use machine if it is not in perfect working order, or if there is any evidence of damage. In such cases inform Nespresso Club immediately for further assistance. This appliance may become a safety hazard if these instructions and safety precautions are ignored. 1. 3. Unplug the machine and cut off the power cord near housing. Dispose of machine and cable at your public disposal depot, or contact Customer Services for further assistance. Start Fast flashing (2 x per sec): Emptying, Descaling Capsule container for 12 ­ 14 capsules** Drip grid** b Fill in descaling kit fluid and 0. 5 l water Place a recipient 1. close lever Flow speed depends on coffee variety Vinegar: Danger of damage Capsule area leaking (water in capsule container) Position capsule correctly. If leakage: call NESPRESSO Club FOR UK AND REPUBLIC OF IRELAND ONLY WARNING: Always replace the fuse cover of the fitted plug, never use the plug with the fuse cover omitted. If a replacement fuse cover is required, ensure it is the same as the one visible on the pin face of the plug (i. e. Fuse covers are available from: BBS Ltd Po Box 110 Farnham Surrey GU104XL Phone : 01252 727755 Use a 13 A fuse approved by ASTA to BS1362, marked thus WARNING: a plug with a bared flexible cord is hazardous if engaged in a live socket. If the fitted plug has been cut from the power supply cord, it should be destroyed and replaced with a three pin plug in accordance with the following code: BLUE : neutral BROWN : live GREEN/YELLOW : earth The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter "N" or coloured BLUE or BLACK. [. . . ] Fuse covers are available from: BBS Ltd Po Box 110 Farnham Surrey GU104XL Phone : 01252 727755 Use a 13 A fuse approved by ASTA to BS1362, marked thus WARNING: a plug with a bared flexible cord is hazardous if engaged in a live socket. If the fitted plug has been cut from the power supply cord, it should be destroyed and replaced with a three pin plug in accordance with the following code: BLUE : neutral BROWN : live GREEN/YELLOW : earth The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter "N" or coloured BLUE or BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter "L" or coloured BROWN or RED which is connected to the fuse. [. . . ]