User manual MAKITA 111

[. . . ] Ventilate your work area adequately when you perform sanding operations. Use of this tool to sand some products, e. Leaded paint surfaces, wood and metals could expose user and bystanders to dust containing hazardous substances. Intended use The tool is intended for sawing and cutting wood, plastic, gypsum, non-ferrous metals, and fastening elements (e. [. . . ] The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss. Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation. Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control. Do not run the power tool while carrying it at your side. Accidental contact with the accessory could snag your clothing, pulling the accessory into your body. Do not operate the power tool near flammable materials. Do not use accessories that require liquid coolants. When using application tools with a different type of installation section, use a correct adapter (optional accessory). WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. FUNCTIONAL DESCRIPTION WARNING: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Failure to switch off and unplug the tool may result in serious personal injury from accidental start-up. 6 OPERATION WARNING: • Before starting the tool and during operation, keep your hand and face away from the application tool. €¢ Do not apply excessive load to the tool which may cause a motor lock and stop the tool. OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. [. . . ] Work mode: Scraping Sound pressure level (LpA): 77 dB (A) Uncertainty (K): 3 dB (A) The noise level under working may exceed 80 dB (A). Wear ear protection MAINTENANCE CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. €¢ Never use gasoline, benzine, thinner, alcohol or the like. discoloration , deformation or cracks may result. [. . . ]