User manual MAKITA 2414NBE

[. . . ] Check the wheel carefully for cracks or damage before operation. Use only flanges specified for this tool. Be careful not to damage the spindle, flanges (especially the installing surface) or bolt, or the wheel itself might break. Keep guards in place and in working order. [. . . ] removing or installing cut-off wheel (Fig. 7) To remove the wheel, raise the safety guard. Press the shaft lock so that the wheel cannot revolve and use the socket wrench to loosen the hex bolt by turning it counterclockwise. Then remove the hex bolt, outer flange and wheel. (Note: Do not remove the inner flange, ring and O-ring. ) To install the wheel, follow the removal procedures in reverse. 8) CAUTION: • Be sure to tighten the hex bolt securely. Insufficient tightening of the hex bolt may result in severe injury. Use the socket wrench provided to help assure proper tightening. €¢ Always use only the proper inner and outer flanges which are provided with this tool. €¢ Always lower the safety guard after replacing the wheel. 2) CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. For tool with lock button To start the tool, simply pull the switch trigger. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. For tool with lock-off button To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. To start the tool, depress the lock-off button and pull the switch trigger. 3) The spark guard is factory-installed with its lower edge contacting the base. Operating the tool in this position will cause many sparks to fly around. Loosen the screw and adjust the spark guard to a position at which minimum sparks will fly around. 9) By turning the vise handle counterclockwise and then flipping the vise nut to the left, the vise is released from the shaft threads and can be moved rapidly in and out. To grip workpieces, push the vise handle until the vise plate contacts the workpiece. [. . . ] €¢ Abrasive cut-off wheels • Socket wrench 17 NOTE: • Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. ENG905-1 ENH003-13 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Portable Cut-Off Model No. / Type: 2414NB are of series production and Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents: EN61029 The technical documentation is kept by our authorized representative in Europe who is: Makita International Europe Ltd. [. . . ]