User manual MAKITA 2711

[. . . ] How to use cAUTION · Read and thoroughly understand this manual and the instruction manual of the tool you use before performing the following. Before installing a tool on this stand, always switch off and unplug the tool. [. . . ] Never pull the lever without holding the handle. Mount the table pipe on the table saw stand securely using the bolts (4 pcs. 1) When securing table saw on the table saw stand, place it on the table saw stand so that the handle of stand is positioned on the left side in the front view of the mounted saw and holes on your tool base match holes in the stand. Place the table saw stand on a level location. When setting up the table saw stand in the upright position and grab the handle firmly and stamp the pipe with your foot, pull the lever and raise the handle with your foot positioned on the pipe and with the lever being pulled. When the table stand has reached one of the four positive stops in height, release the lever while holding handle. After making sure that the lever has returned to its original position and the table stand is securely locked, remove your hands from the handle and foot from the pipe. Adjust the levelness of the table saw stand by rotating the feet (2 pcs. ), and then secure the table saw stand by turning the nuts (2 pcs. Secure the feet of stand to the stable and level surface using holes in the fix plates with two hex bolts. [. . . ] Tournez les pieds (2 pièces) du support de scie circulaire pour la mettre de niveau, puis immobilisez le support en tournant les écrous (2 pièces). Fixez les pieds du support sur une surface stable et plane par les orifices prévus dans les plaques de fixation, à l'aide de 2 boulons hexagonaux. [. . . ]