Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA 4320. We hope that this MAKITA 4320 user guide will be useful to you.
Lastmanuals help download the user guide MAKITA 4320.
You may also download the following manuals related to this product:
MAKITA 4320 (2408 ko) MAKITA 4320 PARTS LIST (61 ko)
Manual abstract: user guide MAKITA 4320ANNEXE 178
Detailed instructions for use are in the User's Guide.
[. . . ] Keep the blade shank flush with the installing position so that it does not ride up on the shoulder of the blade holder. Inspect for and remove all nails from the workpiece before operation. Check for the proper clearance beneath the workpiece before cutting so that the blade will not strike the floor, workbench, etc. Make sure the blade is not contacting the workpiece before the switch is turned on. [. . . ] Tool speed is increased by increasing pressure on the trigger. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it. A speed control screw is provided so that maximum tool speed can be limited (variable). Turn the speed control screw clockwise for higher speed, and counterclockwise for lower speed. For tools without speed control screw To start the tool, simply pull the trigger. Tool speed is increased by increasing pressure on the trigger. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it. 14 & 15) When cutting widths of under 150 mm repeatedly, use of the guide rule will assure fast, clean, straight cuts. To attach the guide rule (rip fence), secure the rule holder to the base with the screw (do not tighten). Insert the guide rule between the base and the rule holder. Now tighten the screw with the hex wrench. Use of the circular guide insures clean, smooth cutting of circles (radius, under 200 mm) and arcs. To attach the circular guide, use the pin, inserting it in the center hole (arrow) and secure it with the threaded knob. Always use a suitable coolant (cutting oil) when cutting metal. failure to do so will cause significant blade wear. The underside of the workpiece can be greased instead of using a coolant. [. . . ] Loosen the bolt on the back of the base with the hex wrench, then slide the base backwards. Check the contact between the back edge of the blade and the roller, then secure the bolt. Starting a cut at other than the edge of the workpiece without first drilling a starting hole requires a "plunge cut". This can be accomplished by tipping the tool forward until the front end of the base rests against the workpiece. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 4320
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 4320 will begin.
MAKITA 4320 (2408 ko)
