User manual MAKITA 4334D

[. . . ] ENGLISH Cordless Jig Saw MODEL 4334D 002701 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model Length of stroke Wood Max. cutting capacities Mild steel Aluminum Strokes per minute (min ) Overall length Net weight Rated voltage -1 4334D 26 mm 135 mm 10 mm 20 mm 500 - 2, 800 281 mm 3. 4 kg D. C. 18 V · Due to our continuing programme of research and development, the specifications herein are subject to change without notice. [. . . ] Take caution to prevent dust inhalation and skin contact. Always use the correct dust mask/respirator for the material and application you are working with. SAVE THESE INSTRUCTIONS. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. 4 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Always cover the battery terminals with the battery cover when the battery cartridge is not used. 7. ENC004-1 (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. Be careful not to drop or strike battery. 2. 3. 4. 5. 8. 6. SAVE THESE INSTRUCTIONS Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. [. . . ] Push the blade installing lever in the (1) direction to release it. (1) 1 1. Blade installing lever 002720 2. (3) (2) (4) Pull the blade installing lever in the (2) direction until it stops with a little click. If you have difficulty pulling it out, try to do so while moving it back and forth in the (3) direction. 13 002993 3. Rotate the blade installing lever in the (4) direction until it stops. The clamp will protrude from the blade holder. 1 2 1. [. . . ]