Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA 5017RBK. We hope that this MAKITA 5017RBK user guide will be useful to you.
Lastmanuals help download the user guide MAKITA 5017RBK.
Detailed instructions for use are in the User's Guide.
[. . . ] for public low-voltage distribution systems of between 220 V and 250 V Switching operations of electric apparatus cause voltage fluctuations. The operation of this device under unfavourable mains conditions can have adverse effects to the operation of other equipment. With a mains impedance equal or less than 0. 35 Ohms it can be presumed that there will be no negative effects. [. . . ] 5 illustrates the RIGHT way to cut off the end of a board, and Fig. If the workpiece is short or small, clamp it down. Never attempt to saw with the circular saw held upside down in a vice. This is extremely dangerous and can lead to serious accidents. Before setting the tool down after completing a cut, be sure that the lower (telescoping) guard has closed and the blade has come to a complete stop. Ensure that the diameter, thickness and other characteristics of the saw blade are suitable for the tool. â· Ensure that the saw blade is suitable for the spindle speed of the tool. CAUTION: Always be sure that the tool is switched off and unplugged before installing or removing the saw blade. The following blade can be used with this tool. Do not use saw blades which do not comply with the characteristics specified in these instructions. â· Do not use saw blades the disc of which is thicker or the set of which is smaller than the thickness of the riving knife. To remove the saw blade, depress the shaft lock fully to prevent shaft rotation, then use the hex wrench to loosen the hex socket head bolt. 8) Now remove the outer flange, raise the safety cover as much as possible, and remove the saw blade. 9) Install the saw blade using the reverse of the removal procedure. Install the inner flange, saw blade, outer flange and hex socket head bolt, in that order. Be sure to secure the hex socket head bolt tightly. Make sure that the blade teeth point forward in the same direction as the tool rotation (the arrow on the blade should point in the same direction as the arrow on the tool). Move the base and raise the safety cover. Then use the hex wrench to loosen the hex head socket bolt for the riving knife adjustment. Move the riving knife up or down over the two protuberances for settings indicated in the illustration, so as to obtain the proper clearance between the riving knife and saw blade. [. . . ] This tool is equipped with a dust box to collect dust and cut chips. When the dust box is about two thirds full, empty its contents. Cleaner cutting operations can be performed by connecting this tool to a Makita vacuum cleaner. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 5017RBK
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 5017RBK will begin.
