User manual MAKITA 6176D

[. . . ] Cordless Driver Drill MODEL 6041D MODEL 6076D MODEL 6176D 002864 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model Steel / Wood Capacities Wood screw 6041D 10 mm (3/8") 4. 5 x 20 mm (3/16" x 3/4") 450/min. 201 mm (7-7/8") 0. 82 kg (1. 8 lbs) Battery Charger DC4100 DC7020B A. C. only 50 Hz - 60 Hz Input 6076D 10 mm (3/8") 4. 5 x 20 mm (3/16" x 3/4") 600/min. [. . . ] To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Do not operate charger with damaged cord or plug - replace them immediately. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Do not disassemble charger or battery cartridge; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. The battery charger is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the battery charger. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5 ADDITIONAL SAFETY RULES FOR CHARGER & TOOL 1. The charger and the tool are specifically designed to work together. Do not attempt to charge any other cordless tool with this charger. Do not attempt to charge the tool with any other charger. Do not charge the tool when temperature is BELOW 10°C (50°F) or ABOVE 40°C (104°F). Do not attempt to use a step-up transformer, an engine generator or DC power receptacle. Do not store the tool in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the tool even if it is severely damaged or is completely worn out. Do not charge inside a box or container of any kind. [. . . ] Magazine/Newspaper From dealer Store display Catalog Other ( ) 2. Construction trade Industrial maintenance Home maintenance Other ( ) 4. Design Features Size Price Makita Brand Power Other ( ) 5. Any comments? Paste Date Purchased Month Day Year 20 Model No. Paste Serial No. Initial Last Name Male Female Single Married Paste Street Address Paste City Province Postal Code Paste AGE: Occupation: Under 19 20-29 30-39 40-49 Over 50 Paste Dealer's Name & Address: 14 Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Paste Certificate of Warranty Mail to Makita Factory Service Centres Head Office: Regional Office: Regional Office: (Montreal) Dartmouth: Ville St. [. . . ]