Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA 6222D. We hope that this MAKITA 6222D user guide will be useful to you.
Lastmanuals help download the user guide MAKITA 6222D.
Detailed instructions for use are in the User's Guide.
[. . . ] It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Always cover the battery terminals with the battery cover when the battery cartridge is not used. [. . . ] Start the tool slowly and then increase the speed gradually. Release the trigger as soon as the clutch cuts in. nOTE: · Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged. ⷠWhen driving wood screws, predrill pilot holes to make driving easier and to prevent splitting of the workpiece. Important: Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit. CAUTION: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. to start the tool , simply pull the trigger. Tool speed is increased by increasing pressure on the trigger. First, turn the adjusting ring so that the pointer on the adjusting ring points to the u marking. Drilling in wood When drilling in wood, best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece. ⷠDrilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a centre-punch and hammer at the point to be drilled. place the point of the bit in the indentation and start drilling. Use a cutting lubricant when drilling metals. The exceptions are iron and brass which should be drilled dry. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool. [. . . ] The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 6222D
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 6222D will begin.
MAKITA 6222D ANNEXE 996 (198 ko)
