User manual MAKITA 6260DWPE

[. . . ] Cordless Driver Drill MODEL 6260D MODEL 6270D MODEL 6280D 005216 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w. c o m SPECIFICATIONS Model Steel Wood Capacities Wood screw Machine screw No load speed (RPM) Overall length Net weight Rated voltage Standard battery cartridges 1. 4 kg ( 3. 1 lbs) D. C. 9. 6V PA09 High Low 21 mm (13/16") 5. 1 x 38 mm (3/16" x 1-1/2") 6260D 6270D 10 mm (3/8") 25 mm (1") 25 mm (1") 6280D 5. 1 x 63 mm (3/16" x 2-1/2") 6 mm (1/4") 0 - 1, 200/min. 192 mm (7-9/16") 1. 5 kg (3. 3 lbs) D. C. 12V PA12 1. 6 kg (3. 5 lbs) D. C. 14. 4V PA14 · Manufacturer reserves the right to change specifications without notice. [. . . ] The battery cartridge can explode in a fire. 6. Do not short the battery cartridge: 9. Be careful not to drop or strike battery. SAVE THESE INSTRUCTIONS Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 3. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 4. Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months. 5 FUNCTIONAL DESCRIPTION · CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. 005217 Installing or removing battery cartridge · · Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. 1 2 1. Battery cartridge · · 005218 Switch action · CAUTION: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. 1 1. Switch trigger To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. 6 005219 Reversing switch action This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. [. . . ] Dayton, NJ 08810-1539 (609) 655-1212 TEXAS 12801 Stemmons Fwy. 809 Farmers Branch, TX 75234 (972) 243-1150 4321 W. Sam Houston Pkwy Suite 130 Houston, TX 77043 (713)983-8034 3453 IH-35 North, Ste. 101 San Antonio, TX 78219 (210) 228-0676 MASSACHUSETTS 232 Providence Highway Westwood, MA 02090 (781) 461-9754 COLORADO 11809 E. [. . . ]