User manual MAKITA 6924N

[. . . ] ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. ADDITIONAL SAFETY RULES GEB006-3 FOR TOOL DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to shear wrench safety rules. [. . . ] Press the pin to allow inserting the inner sleeve, then release the pin to secure the inner sleeve. 5) Insert the outer and inner sleeves into the tool while rotating the inner sleeve alternately clockwise and counterclockwise until there is no gap between the outer sleeve and the tool. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. 15) To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center. Sleeve Outer sleeve Inner sleeve Outer sleeve Inner sleeve Outer sleeve Inner sleeve Outer sleeve Inner sleeve Bolt size M22 M22 M24 M24 7/8” 7/8” 1” 1” Length (mm) 49 48 49 49 49 48 49 49 OPERATION Bolt installation Slip the tool onto the bolt so that the inner sleeve completely covers the bolt tip. 7) CAUTION: • Be careful when fitting the sleeve onto the bolt tip. Striking the tip can damage it so that it will no longer fit inside the sleeve properly. Keep forward pressure on the tool while sliding it further forward until the outer sleeve fits completely over the nut. [. . . ] Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. [. . . ]