Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA 8035NB. We hope that this MAKITA 8035NB user guide will be useful to you.
Lastmanuals help download the user guide MAKITA 8035NB.
Detailed instructions for use are in the User's Guide.
[. . . ] 11
• • • • • • • • • •
Wear protective helmet, eye and ear protection! • • • • • • • • •
Hold the saw with both hands while working!We are confident that you will be satisfied with this modern piece of equipment. The PS-220 TH/PS-221 TH/PS-222 TH (Tophandle) is a very light and handy chain saw with the handle on the top. [. . . ] 29) Lift the chain (9) over the sprocket (10). Using your right hand, guide the chain into the top guide groove (11) on the guide bar. 30) Note that the cutting edges along the top of the chain must point in the direction of the arrow!Pull the chain (9) around the nose (12) of the guide bar in the direction of the arrow. Pull the guide bar by hand fully toward its nose. Make sure that the chain blade fits the grooves of the guide bar. 31) First, push the sprocket cover (3) into its fixture (4). Make sure that the pin (8) of the chain tightener is in the hole on the guide bar. 36)
If the kickback is strong enough the sudden acceleration of the guide bar combined with the inertia of the hand guard (1) will automatically actuate the chain brake. 32)
Engaging the chain brake (braking) (Fig. Releasing the chain brake Pull the hand guard (1) towards you (arrow 2) until you feel it catch. 35)
The PS-220 TH/PS-221 TH/PS-222 TH comes with an inertia chain brake as standard equipment. in addition , allergic reactions are known to occur. Eyes can be irritated by contact with oil. If oil comes into your eyes, immediately wash them with clear water. If your eyes are still irritated, see a doctor immediately!42)
Never work with the chain saw without sufficient chain lubrication. Otherwise the service life of the chain and guide bar will be reduced. Before starting work check the oil level in the tank and the oil feed. Check the oil feed rate as described below: Start the chain saw (see “Starting the engine”). 15 cm above a trunk or the ground (use an appropriate base). If the lubrication is sufficient, you will see a light oil trace because oil will be flung off the sawing device. [. . . ] Guarantee
DOLMAR guarantees the highest quality and will therefore reimburse all costs for repair by replacement of damaged parts resulting from material or production faults occurring within the guarantee period after purchase. Please note that in some countries particular guarantee conditions may exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of the product. Please note that we cannot accept any responsibility for damage caused by: • Disregard of the instruction manual. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 8035NB
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 8035NB will begin.
