Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MAKITA 9401. We hope that this MAKITA 9401 user guide will be useful to you.
Lastmanuals help download the user guide MAKITA 9401.
Detailed instructions for use are in the User's Guide.
[. . . ] Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. Safety hints For your own safety, please refer to the enclosed Safety instructions. [. . . ] Some material contains chemicals which may be toxic. Take caution to prevent working dust inhalation and skin contact. Always use the correct dust mask/respirator for the material and application you are working with. The use of the dust bag makes sanding operations clean and dust collection easy. To attach the dust bag, fit it onto the dust spout. For the best results, empty the dust bag when it becomes about half full, tapping it lightly to remove as much dust as possible. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it. For Model 9402 To change the tool speed, press the "H" side of the speed change switch for high speed or the "L" side for low speed. CAUTION: Use the speed change switch only after the tool comes to a complete stop. Turn the tool on and wait until it attains full speed. then gently place the tool on the workpiece surface. Keep the belt flush with the workpiece at all times and move the tool back and forth. Excessive pressure may cause stalling, overheating of the motor, burning of the workpiece and possible kickback. CAUTION: The tool should not be in contact with the workpiece surface when you turn the tool on or off. [. . . ] Â The typical weighted root mean square acceleration value is not more than 2. The typical A-weighted noise levels are sound pressure level: 89 dB (A) sound power level: 102 dB (A) Â Wear ear protection. Â The typical weighted root mean square acceleration value is not more than 2. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 9401
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 9401 will begin.
MAKITA 9401 9016B (133 ko)
