User manual MAKITA 9501B

[. . . ] We declare under our sole responsibility that this product For European countries only is in compliance with the following standards of standNoise and Vibration ardized documents, EN50260, EN55014 in accordance with Council Directives, 89/336/EEC, 98/37/EC. The typical A-weighted sound pressure level is not more than 70 dB (A). Yasuhiko Kanzaki CE 2003 The noise level under working may exceed 85 dB (A). ­ The typical weighted root mean square acceleration Director value is not more than 2. 5 m/s2. [. . . ] Have your tool repaired by a qualified person. This tool is constructed in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. Ensure battery is disposed of safely as instructed by the manufacturer. ADDITIONAL SAFETY RULES 1. Other personal protective equipment such as dust mask, gloves, helmet and apron should be worn. Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Use only wheels with correct size and wheels having a maximum operating speed at least as high as the highest No Load Speed marked on the tool's nameplate. When using depressed center wheels, be sure to use only fiberglassreinforced wheels. 6. ENB031-6 Check the wheel carefully for cracks or damage before operation. Replace cracked or damaged wheel immediately. Observe the instructions of the manufacturer for correct mounting and use of wheels. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Always cover the battery terminals with the battery cover when the battery cartridge is not used. 7. ENC004-1 (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. [. . . ] Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. 1 2 · · 1. Battery cartridge · 001030 Shaft lock CAUTION: Never actuate the shaft lock when the spindle is moving. Press the shaft lock to prevent spindle rotation when installing or removing accessories. [. . . ]