User manual MAKITA 9910(1)

[. . . ] Belt Sander 76 mm (3") MODEL 9910 76 mm (3") MODEL 9911 003361 DOUBLE INSULATION INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w. c o m SPECIFICATIONS Model Belt size Belt speed Overall length Net weight 9910 76 mm x 457 mm (3" x 18") 270 m/min. (250 - 900 ft. /min. ) 262 mm (10 - 3/8") 2. 6 kg (5. 8 lbs) 9911 · Manufacturer reserves the right to change specifications without notice. [. . . ] Ordinary eye or sun glasses are NOT safety glasses. Make sure the belt is not contacting the workpiece before the switch is turned on. This tool has not been waterproofed, so do not use water on the workpiece surface. Ventilate your work area adequately when you perform sanding operations. Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection. SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. 5 SYMBOLS The followings show the symbols used for tool. V . . . . . . . . . . . . . . . . . . . . . . . hertz . . . . . . . . . . . . . . . . alternating current . . . . . . . . . . . . . . . . . . . . Class II Construction m/min . . . . . . . . . . . . . . . meter per minute USD204-1 6 FUNCTIONAL DESCRIPTION · CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 003366 Switch action · CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool. 1 2 1. Switch trigger · To start the tool, simply pull the switch trigger. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. Speed adjusting dial 003369 For 9911 only The belt speed can be infinitely adjusted between 75 m (250 ft. ) and 270 m (900 ft. ) per minute by turning the speed adjusting dial to a given number setting from 1 to 6. Higher speed is obtained when the dial is turned in the direction of number 6; lower speed is obtained when it is turned in the direction of number 1. Select the proper speed for the workpiece to be sanded. CAUTION: If the tool is operated continuously at low speeds for a long time, the motor will get overloaded, resulting in tool malfunction. The speed adjusting dial can be turned only as far as 6 and back to 1. Do not force it past 6 or 1, or the speed adjusting function may no longer work. 1 1. Speed adjusting dial · · 7 ASSEMBLY · CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 003373 Installing or removing abrasive belt Pull the lever all the way out and install the belt over the rollers, then return the lever to the original position. 1 1. Lever 003378 · CAUTION: When installing the belt, make sure that the direction of the arrow on the back of the belt corresponds to the one on the tool itself. 003382 Adjusting belt tracking Switch on the tool and make sure that the belt is aligned properly. If the edge of the belt extends beyond the edge of the steel plate or the edge of the belt retracts more than 8 mm (5/16") away from the edge of the steel plate, use the adjusting screw to adjust the belt tracking. 1 more than 8mm (5/16") 2 1. Adjusting screw 003387 Dust bag Attach the dust bag onto the dust spout. When attaching the dust bag, push it onto the dust spout firmly as far as it will go to prevent it from coming off during operation. [. . . ] A Kent, WA 98032 (253) 395-8055 KANSAS 8819 W. Overland Park, KS 66212 (913) 642-1111 NEVADA 3375 S. 22 - 24 Las Vegas, NV 89102 (702) 368-4277 OREGON 828 19th Avenue. , N. W. Portland, OR 97209 (503) 222-1823 KENTUCKY 1215 S. [. . . ]