User manual MAKITA BJR182

[. . . ] WARNING: For your personal safety, READ and UNDERSTAND before using. Due to our continuing programme of research and development, the specifications herein are subject to change without notice. ⷠNote: Specifications may differ from country to country. There is an increased risk of electric shock if your body is earthed or grounded. [. . . ] If you use this tool unsafely or incorrectly, you can suffer serious personal injury. Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. Ordinary eye or sun glasses are NOT safety glasses. Inspect workpiece for any nails and remove them before operation. Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor, workbench, etc. Ensure the switch is in the off position before inserting battery pack. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Make sure the blade is not contacting the workpiece before the switch is turned on. Always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece. Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin. Always use the correct dust mask/respirator for the material and application you are working with. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. the battery cartridge can explode in a fire. [. . . ] NOTE: If you do not insert the saw blade deep enough, the saw blade may be ejected unexpectedly during operation. The saw blade is removed and the blade clamp lever is fixed at the released position . CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. nOTE: · If you remove the saw blade without rotating the blade clamp lever fully, the lever may not be locked in the released positon . [. . . ]