User manual MAKITA BO4555K

[. . . ] Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. [. . . ] Keep handles dry, clean and free from oil and grease. Ordinary eye or sun glasses are NOT safety glasses. This tool has not been waterproofed, so do not use water on the workpiece surface. Ventilate your work area adequately when you perform sanding operations. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. use appropriate respiratory protection. Be sure that there are no cracks or breakage on the pad before use. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to sander safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Repeat the same process for the other end of the base, maintaining the proper paper tension. After inserting the paper, make sure the clamping part hold it securely. Otherwise the paper will be loose and subject to slippage, resulting in uneven sanding operation. Before plugging in the tool, always check to see that the tool is switched off. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. When using the dust bag, make holes in the abrasive paper using the punch plate as follows: 1. Place the punch plate over the abrasive paper so that the bent sides of the punch plate are flush with the paper edges. [. . . ] To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. [. . . ]