User manual MAKITA BO4901

[. . . ] Due to our continuing program of research and development, the specifications herein are subject to change without notice. Note: Specifications may differ from country to country. Intended use The tool is intended for the sanding of large surface of wood, plastics and metal materials as well as painted surfaces. Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. [. . . ] Attach the paper to the pad, aligning the holes in the paper with those in the pad. This tool has not been waterproofed, so do not use water on the workpiece surface. Ventilate your work area adequately when you perform sanding operations. Some material contains chemicals which may be toxic. Take caution to prevent working dust inhalation and skin contact. Always use the correct dust mask/respirator for the material and application you are working with. For BO4901 only NOTE: To use the hook-and-loop type of abrasive paper, first replace the pad. Remove the pad for the conventional type of abrasive paper from the tool with a screwdriver. Turn the tool on and wait until it attains full speed. then gently place the tool on the workpiece surface. Keep the base flush with the workpiece and apply a light pressure on the tool. cAUTION: · Never run the tool without the abrasive paper. Excessive pressure may decrease the sanding efficiency, damage the abrasive paper and/ or shorten tool life. Always be sure that the front grip is tightened securely before operation. For BO4900, BO4900V only Place the paper dust bag on the paper dust bag holder with its front side upward. Insert the front fixing cardboard of the paper dust bag into the groove of the paper dust bag holder. 5) Then press the upper part of the front fixing cardboard in arrow direction to hook it onto the claws. 6) Insert the notch of the paper dust bag into the guide of the paper dust bag holder. Then install the paper dust bag holder set on the tool. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. [. . . ] CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. Paper dust bag holder (with paper dust bag) Support de sac à poussières en papier (avec sac) Staubsackhalter (mit Staubsack) Supporto sacchetto di carta della polvere (con sacchetto di carta della polvere) Papieren stofzakhouder (met papieren stofzak) Bastidor para bolsa de polvo de papel (sin bolsa de polvo de papel) Suporte para o saco de papel para o pó (com saco de papel para o pó) Papirstøvposeholder (med papirstøvpose) Hållare för pappersdammpåse (med pappersdammpåse) Holder til støvposer av papir (med støvpose av papir) Paperinen pölypussin pidin (paperisella pölypussilla) (µ ) EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in compliance with the following standards or standardized documents, HD400, EN50144, EN55014, EN61000 in accordance with Council Directives, 73/23/EEC, 89/336/EEC and 98/37/EC. [. . . ]