User manual MAKITA BO5010K

[. . . ] Random Orbit Sander MODEL BO5010 MODEL BO5011 003276 DOUBLE INSULATION INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w. c o m SPECIFICATIONS Model Pad size Orbits per minute Dimensions (L x W x H) Net weight BO5010 / BO5011 123 mm (4 - 13/16") 12, 000 150 mm x 123 mm x 145 mm (5 - 7/8" x 4 - 13/16" x 5 - 11/16") 1. 2 kg (2. 6 lbs) · Manufacturer reserves the right to change specifications without notice. · Specifications may differ from country to country. GENERAL SAFETY RULES (For All Tools) USA002-2 WARNING: Read and understand all instructions. [. . . ] An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. The smaller the gage number, the heavier the cord. Table 1: Minimum gage for cord Ampere Rating More Than 0 6 10 12 Not More Than 6 10 12 16 18 18 16 14 Volts 120 V 25 ft. AWG 16 16 16 12 16 14 14 12 14 12 Not Recommended SPECIFIC SAFETY RULES USB040-4 DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to sander safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Ordinary eye or sun glasses are NOT safety glasses. This tool has not been waterproofed, so do not use water on the workpiece surface. Ventilate your work area adequately when you perform sanding operations. Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection. 4 SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. SYMBOLS The followings show the symbols used for tool. V . . . . . . . . . . . . . . . . . . . . . . . hertz . . . . . . . . . . . . . . . . alternating current USD205-1 n . . . . . . . . . . . . . . . . . . . . no load speed ° . . . . . . . . . . . . . . . . . . . . Class II Construction . . . /min. . . . . . . . . . . . . . . . orbits per minute 5 FUNCTIONAL DESCRIPTION · CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 003285 Switch action · · CAUTION: Before plugging in the tool, always check to see that the tool is switched off. Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool. 1 1. Switch To start the tool, press the "ON ( I )" side of the switch. To stop the tool, press the "OFF (O)" side of the switch. ASSEMBLY · CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing abrasive disc 003299 For BO5010 CAUTION: · Always use hook-and-loop system abrasive discs. Never use pressure-sensitive abrasive discs. To install the abrasive disc, first remove all dirt or foreign matter from the pad. Then attach the abrasive disc to the pad, using the hook-and-loop system of the abrasive disc and the pad. Be careful to align the holes in the abrasive disc with those in the pad. For BO5011 To install the abrasive disc, first remove all dirt or foreign matter from the pad. [. . . ] A Kent, WA 98032 (253) 395-8055 KANSAS 8819 W. Overland Park, KS 66212 (913) 642-1111 NEVADA 3375 S. 22 - 24 Las Vegas, NV 89102 (702) 368-4277 OREGON 828 19th Avenue. , N. W. Portland, OR 97209 (503) 222-1823 KENTUCKY 1215 S. [. . . ]