User manual MAKITA BUC122

[. . . ] 1 2 3 4 5 6 7 8 9 10 11 12 13 Top handle Battery cartridge Sprocket cover Front hand guard Guide bar Tip guard Saw chain Knob Lock-off button Front handle Switch trigger Chain cover Carabiner or rope attachment point Be sure that you understand their meaning before use. Wear a helmet, goggles and ear protection. Hold the saw with both hands while working!This saw is to be used by properly trained operators only. [. . . ] Low tension of saw chain may cause coming out of place. Installing or removing saw chain should be carried out in a clean place free from sawdust and the like. Saw chain is automatically lubricated when the tool is in operation. Check the amount of remaining oil in the oil tank through the oil inspection window. To refill the tank, remove the cap from the oil tank opening. After refilling the tank, always screw the provided oil tank cap on the chain saw. cAUTION: · When filling the chain saw with chain oil for the first time, or refilling the tank after it has been completely emptied, add oil up to the bottom edge of the filler neck. The oil delivery may otherwise be impaired. As a saw chain oil, use oil exclusively for Makita chain saws or oil available in market. Never use oil including dust and particles or volatile oil. When pruning trees, use botanical oil. Never force the chain saw when pruning trees. Before cutting out, make sure that the provided oil tank cap is screwed in place. Start it and wait until lubrication on saw chain is adequate. Bring the tip guide/lower guide into contact with the branch to be cut before switching on. Cutting withoutbringing the tip guide/lower guide into contact with the branch may cause the guide bar to wobble, resulting in injury to operator. Saw the wood to be cut by just moving it down. Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the saw chain. Always wear gloves when installing or removing the saw chain. [. . . ] The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Chain Saw Model No. [. . . ]