User manual MAKITA DBC260U

[. . . ] Important: Read this instruction manual carefully before putting the Brush Cutter/String Trimmer and strictly observe the safety regulations!Store this instruction manual in a safe place for future reference. Thank you for purchasing this MAKITA Brush Cutter/String Trimmer. MAKITA Brush Cutters/String Trimmers are developed as a product of our many years of knowledge, experience, and a detailed development programme. [. . . ] Spindle speed Maximum spindle speed (corresponding) Maximum fuel consumption Maximum specific fuel consumption Idling speed Clutch engagement speed Carburetor Ignition system Spark plug Electrode gap Right handle (Rear grip) Vibration per ISO 228671) Left handle (Front grip) Sound pressure level average to ISO 228681) Sound power level average to ISO 228681) Fuel Gear ratio 1) The data takes equally into account the idling and racing or wide open throttle speed operating modes. Names of parts DBC260U U Handle Type CAUTION: Before doing any work on the brush cutter, always stop the engine and disconnect the spark plug connector from the spark plug. CAUTION: Ensure you have reassembled the brush cutter completely before starting it. ­ Place the handle-fixing metal so that the handle with the control lever is positioned on the right (the right-hand grip side) when viewed from the engine side. Utmost care is required when handling fuel. fuel may contain substances similar to solvents. Refuel either in a well ventilated room or outdoors. Do not inhale fuel vapors, and avoid any contact of fuel or oil with your skin. Mineral oil products degrease your skin. Prolonged skin contact with these products will cause your skin to become extremely dry, which may result in various kinds of skin disease. in addition , allergic reactions may occur. Eyes can be irritated by contact with oil. If oil comes into your eyes, immediately wash them with clear water. If your eyes are still irritated, see a doctor immediately. It runs on a mixture of fuel and two-stroke engine oil. The engine is designed for unleaded regular fuel with a min. If for any reason no such fuel is available, you can use fuel with a higher octane value. This will not affect the engine, but it may cause poor operating behaviour. Similar problems will arise from the use of leaded fuel. To obtain optimum engine operation and to protect your health and the environment, use only unleaded fuel!To lubricate the engine, add two-stroke engine oil (quality grade: JASO FC or ISO EGD) to the fuel. The engine has been designed to use the specified twostroke engine oil at mixture ratio of 50:1 to protect the environment. [. . . ] A clogged air cleaner may make it difficult or impossible to start the engine, or may increase the engine rotational speed. ­ The gap between the two electrodes of the spark plug should be 0. If the gap is too wide or too narrow, adjust it. If the spark plug is clogged with carton or dirty, clean it thoroughly or replace it. [. . . ]