User manual MAKITA FH2200

[. . . ] You are also asked to carefully read the safety regulations in the applicable chapter of this handbook. Important: Read the instruction handbook before using the machine. Keep other people at a safe distance whilst working. Warning: Remove the spark plug lead and read instructions before carrying out any repair or maintenance. [. . . ] Do not leave containers with grass cuttings in rooms. 5) Check the stone-guard and grass-catcher frequently for wear and deterioration. 6) If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. 7) Wear strong work gloves when removing and reassembling the blade. 8) Keep the blade balanced during sharpening. All operations on the blade (dismantling, sharpening, balancing, remounting and/or replacing) require a certain familiarity and special tools. regular maintenance is essential for safety and performance. 9) For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced and not repaired. Use genuine spare parts (blades should always bear the symbol ). Parts that are not of the same quality can damage the equipment and be dangerous for your safety. Tighten the thumb knobs (2) securely after adjustment. Fit the starter rope (4-if provided) in the guide (5) and tighten the nut (6). Mount the tray (7-if provided) by pushing the attachments right down until you hear a click. Unscrew the two knobs on the sides (8) to adjust the grip and make it as comfortable as possible. 2 With the plastic part (11) upside-down, fasten the frame (12) to the plastic part using the screws (13). Insert the frame (12) into the sack (14) and attach the plastic profile (15) with the help of a screwdriver, as shown in the drawing. Fit the edge of the cloth (16) right into the groove of the plastic part (11), starting 5-7 mm from the ends. 3 On models with an electric starter, connect the battery cable to the lawnmower’s general cable connection. ROUTINE MAINTENANCE IMPORTANT – Regular, careful maintenance is essential for keeping the safety level and original performance of the machine unchanged in time. 1) Wear strong working gloves during any cleaning, maintenance or adjustment operation on the machine. 2) Carefully clean the machines with water after each cut; remove the grass debris and mud accumulated inside the chassis to avoid their drying and thus making the next startup difficult. [. . . ] 5 To clean inside the machine, use the hosepipe connector (1) provided. Always stand behind the machine's handle when cleaning. 1 Lift the stone-guard and attach the grass-catcher (1) correctly as shown in the drawing. Should you have any doubts or problems, do not hesitate to contact your nearest Service Centre or your Dealer. [. . . ]